Panasonic PVDV702D PVDV702 User Guide - Page 44

Editing Features Audio Dubbing using the External or Built-in Microphone The original sound can be replaced with new sound using the built-in Palmcorder microphone or an external microphone. Before you begin • Connect the external Microphone (if used). • Turn on the Palmcorder. • Insert a pre-recorded tape to be dubbed. The AUDIO-REC setting in CAMERA MENU mode should be as follows: External Microphone with M3 connector (not supplied) External Microphone Jack Built-in Microphone 3JOG KEY 3MENU 1POWER 2PLAY 3A.DUB 2PAUSE 12 bit 16 bit The original sound is recorded on ST (Stereo) 1, and the new sound will be recorded on ST (Stereo) 2. The original sound is replaced with the new sound. • Select 12 bit if you do not want the original sound to be completely replaced during an audio dub. • If you dub over a tape which has both 12 bit and 16 bit audio recordings on it, keep in mind that the original 16 bit audio portion will be completely replaced. 1 Set POWER to VCR. • With the Remote Control, you can set the Palmcorder to stop automatically at a specific point on the tape. See "Memory-Stop Editing" on page 45. 2 Press (PLAY). Then press (PAUSE) where you want dubbing to begin. When using the Palmcorder only 3 Press MENU to display the VCR mode menu screen. Rotate JOG KEY to select REC MODE , then press JOG KEY to display the VCR REC MODE menu screen. Rotate JOG KEY to select AUDIODUB , and then press JOG KEY to select ON. • The Palmcorder will go to Stand By mode, and "A.DUB " indication appears in the EVF or the LCD monitor. Go to step 4. When using the Remote Control only 3 Press A.DUB on the Remote Control. • The Palmcorder will go to Stand By mode, and "A.DUB " indication appears in the EVF or the LCD monitor. Go to step 4. 44 Forassistance, pleasecall: 1-800-211-PANA(7262)orsende-mailto:[email protected]