Panasonic PVQ2512 PVQ1312B User Guide - Page 8
Connections / Initial Setup (ready To Play
View all Panasonic PVQ2512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connections/ Initial Setup (Ready to Play) Please make all cable or antenna connections before plugging into thHeoAwCtoouCtloetn. nPelucgtging the unit power cord into an AC outlet starts auto channel and clock set. Connecting For ANT./Cable Connect the cable from Antenna/Cable to the VHF/UHF terminal on the unit. For DSS/Cable Box Connect the OUT jack on your cable box to the VHF/UHF terminal on the unit with a RF cable. VHF/UHF UNIT VHF/UHF IN from ANT./CABLE VHF/UHF VHF/UHF Cable TV Converter Box WARNING: Overtightening "Nut type" RF coaxial cables VHF/UHF may damage jacks. Finger tighten only. IN from ANT./CABLE Initial Setup (Ready to Play) 1 Plug the unit power cord into an AC wall outlet. 2 Press Power* on the remote or unit. The unit comes on and auto channel and clock set starts. 3 Settings are made automatically. When setup is done, this screen appears. 2/ 6/2002 WED 12:00PM DST : ON SETT ING : CH 10 AUTO CLOCK SET COMPLETED CH AUTO SET PROCEEDING • If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS reciever, it must be turned off. If AUTO CLOCK SET IS INCOMPLETE screen appears, set the clock using MANUAL CLOCK SET procedure on next page. AUTO CLOCK SET PROCEEDING CANCEL : PRESS STOP KEY AUTO CLOCK SET I S I NCOMPLETE PLEASE SET CLOCK BY PRESSING ACT I ON KEY 8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]