Panasonic RP-BTGS10-K RP-BTGS10-K Owner's Manual (English) - Page 10

Listening to music If the Bluetooth® compatible device supports the "A2DP" and "AVRCP" Bluetooth® profiles, music can be played back with remote control operations on the headset. • A2DP (Advanced Audio Distribution Profile): Transmits audio to the headset. • AVRCP (Audio/Video Remote Control Profile): Allows remote control of the device using the headset. 1 Connect the Bluetooth® device and the headset ( P. 8) 2 Select and play the music or video sound on the Bluetooth® device • The selected music or sound is output to the speakers of the headset. Operating time of batteries Battery type Rechargeable battery (supplied) Alkaline dry cell battery Operating time Approx. 5 hours Approx. 4.5 hours Operating time may be less depending on the operating conditions. 10 10 VQT5C48 ■ Note • There may be instances when you need to set the audio on the Bluetooth® device. • Bluetooth® devices that support aptX® can transmit higher quality audio. • When another Bluetooth® device is connected or if the battery is removed, the volume will return to the average hearing level. • If the connection is unstable, cancel the setting for transmitting sound in high quality (including aptX®), and prioritize the Bluetooth® connection. To switch the setting, turn off the headset first. Then press and hold the LED pattern switch button, and turn on the headset again. One short beep followed by a four-tone beep will sound, and the setting will be switched. To return to the setting with high sound quality, perform the above operation again. Two short beeps followed by a four-tone beep will sound, and the setting will return to the default. ■ Attention • The headset might leak sound depending on the volume level. • When the volume is increased to near maximum level, music may sound distorted. Decrease the volume until music sounds without distortion.