Panasonic RP-BTGS10 RP-BTGS10-K Owner's Manual (English) - Page 18
Troubleshooting guide
View all Panasonic RP-BTGS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to "Customer Services Directory (United States and Puerto Rico)" on page 23 if you reside in the U.S.A. or Puerto Rico, or refer to "Product information" on page 17 if you reside in Canada. General No operation • Remove the battery, and insert it again. If you still cannot operate the unit, restore the unit to the factory settings. ( P. 13) 18 18 VQT5C48 Power supply and charging Charging error • Make sure the computer is turned on and is not on standby or sleep mode. • Is the USB port you are currently using working properly? If your computer has other USB ports, unplug the connector from its current port and plug it into one of the other ports. • If the measures mentioned above are not applicable, unplug the USB connector and plug it in again. When the charging light is off: • Check that the USB connector is securely connected to a computer. When the charging light is blinking fast: • The battery may have run down. (Number of recharging times of supplied battery: Approx. 300) Replace with a new specified AAA Ni-MH rechargeable battery and charge it. • A dry-cell battery may be used. A dry-cell battery cannot be charged. • Any other Ni-MH rechargeable battery than specified may have been used. Make sure to use the specified AAA Ni-MH rechargeable battery. • The battery may have been incorrectly placed. Remove the battery from the charger and correctly place the battery again. Charging error/Charging takes longer • Is the USB connector directly connected to the computer? Make sure that the USB charger is connected to the computer without using a USB hub. ( P. 6) The power does not turn on • The AAA Ni-MH rechargeable battery may have run down. Remove the battery and recharge it properly. ( P. 6) • The battery may not be correctly inserted. Remove the battery completely and then correctly insert it back into the unit again. ( P. 7) • Is the battery firmly in contact with the terminals? Clean the battery terminals.