Panasonic SA-C600 Owners Manual - Page 29
Wireless LAN connection
View all Panasonic SA-C600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Wireless LAN connection ■■Preparation Disconnect the AC power supply cord. Disconnect the LAN cable. Place this unit as close to the wireless router as possible. Connect the AC power supply cord to this unit. (⇒ 25) Note ••The setting will be cancelled after the set time limit. In that case, try the setting again. ••To cancel this setting in the middle, press [ ] or turn the unit to standby mode. ••When the connection is established, " " is displayed. Network setting for the first time using the Google Home app 1 Press [ ] to turn this unit on. ••"Wi-Fi Setup" is displayed. 2 Press [ ], [ ] to select "Yes" and then press [OK]. 3 Start the Google Home app and follow the on-screen instructions. (⇒ 30) Note ••This unit will be displayed as "Technics- SA-C600-****" if the device name is not set. ("****" stands for characters unique to each set.) ••You can check your network information (SSID, MAC address and IP address) from the Google Home app or "Technics Audio Center" app. ••Some items on the Google Home app are irrelevant to this unit. ••When this unit is switched to standby mode and turned on before the Wi-Fi setting is complete, "Wi-Fi Setup" is displayed. Set "Wi-Fi Menu" to "Off" to turn off the display. ••For using stream audio via AirPlay, you can set up a network connection using Apple Home app. 29 (Continued)