Panasonic SAEN17 SAEN15 User Guide - Page 4

Radio operations Radio stations can be tuned manually by selecting the station's frequency or they can be preset into channels to make it easy to tune. You can preset up to 20 FM channels and up to 12 AM channels. TUNER BAND To adjust the volume VOLUME 0 (Minimum) 50 (Maximum) OPEN/ LIGHT DISPLAY CLOSE SLEEP 1 2 3 CLOCK/ TIMER ADJ 4 5 6 TIMER SET/CHECK 7 8 9 PGM/CLEAR -AUTO PRESET 0 >=10 AUX TUNER/ CD BAND VOL VOL EXTRA SOUND LIVE PLAY D.BASS EQ VIRTUALIZER MODE ALBUM Input using the numbered buttons To select a 2-digit number e.g. 11: [>=10] → [1] → [1] To adjust the volume Allocation settings Each country allocates broadcast bands according to their particular system. For U.S.A. and Canada You can change the FM step. The step is factory-set to 0.2 MHz, but you can change it to receive broadcasts allocated 0.1-MHz steps. Any FM frequencies preset in channels will be changed by this procedure. Preset them again. For units with PX printed on the outer packaging You can change the AM step. The step is factory-set to 10 kHz, but you can change it to receive broadcasts allocated 9-kHz steps. Any AM frequencies preset in channels will be changed by this procedure. Preset them again. TUNER BAND 1. Select the opposite band from the one you are going to change with [TUNER/BAND]. 2. Press and hold [TUNER/BAND] on the unit. After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed. To return to the original step, repeat the above steps. To improve reception FM AM Extend the whip antenna and Change the direction and location adjust its direction. of the AM loop antenna. If noise is excessive in FM You can improve FM reception by switching reception to monaural. PLAY MODE MONO Press to turn the MONO mode ON/OFF Manual tuning Main unit TUNER BAND Select "FM" or "AM" Remote control TUNER/ BAND Select "FM" or "AM" Select the frequency 34 u i Select the frequency 4 Auto tuning Main unit TUNER BAND Select "FM" or "AM" Remote control Press and hold until the frequency starts changing rapidly TUNER/ BAND 34 u i Select "FM" or "AM" Press and hold until the frequency starts changing rapidly • Auto tuning stops when it finds a station. • To cancel auto tuning press the same button again. Note • Auto tuning may not function when there is excessive interference. Automatic presetting The tuner presets the stations it can receive into channels in ascending order. Perform once for FM stations and once for AM stations. TUNER/ BAND PGM/CLEAR -AUTO PRESET Select "FM" or "AM" Press and hold until "AUTO" appears Note During automatic presetting, the memory indicator ( PGM ) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset. The first station to be preset is displayed when presetting finishes. Manual presetting Preset the stations one at a time. Tune to the signal you want to set as the preset. Within 10 seconds 1 2 3 PGM/CLEAR 4 5 6 -AUTO PRESET Enter preset mode 7 8 9 0 >=10 PGM Select a channel Note The station occupying a channel is erased if another station is preset over that channel. Selecting channels Select "FM" or "AM" Select a channel Select "FM" or "AM" Select a channel