Panasonic SAHT56 Home Theater - Page 5

Control guide Main unit 1 2 3 4 5 6 7 Control guide 8 1 Standby indicator [^] When the unit is connected to the AC power supply, this indicator lights up in standby mode and goes out when the unit is turned on. [8, POWER] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 2 [-MENU, ―SETUP, RETURN] • For entering menus and setup to make various settings. • For returning to previous menus. 3 [TUNE, 2 / 3, 1 / 4] For tuning the radio and selecting menu or setup items. 4 [ENTER] Used during menu or setup operations. 9 10 5 [AUTO SPEAKER SETUP] Flashes during Auto Speaker Setup. Lights when the setup finishes. 6 [INPUT SELECTOR, ] For selecting input. 7 [VOLUME] Volume control. 8 [ ] Headphone jack Plug type: Ø3.5 mm (1/8") stereo • Sound does not come from the speakers if you connect headphones. • Avoid listening for prolonged periods of time to prevent hearing damage. 9 [SETUP MIC] jack For calibration microphone. 10 Remote control signal sensor Display TUNED ST MONO SLEEP 1 [TUNED, ST, MONO] Radio indicators TUNED: A station is tuned ST: A stereo FM broadcast is tuned MONO: You have switched to monaural mode to improve reception 2 [SLEEP] Sleep timer indicator. 3 General display Shows the input mode, radio frequency and other general information. 1 2 3 4 PCM C.FOCUS W M DIGITAL INPUT 5 ft kHz DIGITAL DTS SFC 6 7 MHz PL 2CH MIX 8 9 10 6 [ % DIGITAL, DTS, % PLΙΙ] Lights to indicate the source's input signal and decoding format used. % DIGITAL: Dolby Digital sources DTS: DTS sources % PLΙΙ: Dolby Pro Logic ΙΙ decoder is being used 7 [SFC, 2CH MIX] SFC: Appears when you are using an SFC mode 2CH MIX: Appears when you are listening to a multi-channel source with headphones 8 [M] Flashes or lights during presetting. 4 [PCM, C.FOCUS] PCM: Lights when the PCMFIX mode is set C.FOCUS: Appears when you are using Center Focus 5 [DIGITAL INPUT] Lights when input is digital. 9 [ft, kHz, MHz] Distance and frequency unit indicators ft: feet (speaker distance) RQTX0175 kHz: AM, or PCM sampling frequency MHz: FM 10 [W] Lights when you are using the digital transmitter (➡ page 7). Flashes when there is no link between the main unit and 5 the wireless system (For details, refer to the operating instructions for SH-FX67).