Panasonic SAPM11 Cd Stereo System - Page 24

Reference Timer operations A B C 24 RQT5706 TUNE REW/3 CLEAR FF/4 MODE MUTING FM MODE/BP REV MODE SOUND EQ SLEEP Using the timer SELECTOR REC Headphones (not included) A Using the sleep timer This timer turns your system OFF at the set time (Max. 2 hours, settable at 30-minute intervals). It lets you fall asleep listening to music. by remote control only Preparation: Switch on the power. The figure shows how to set the system to standby mode after 30 minutes. While enjoying the desired source: Press [SLEEP] to select the desired time. Every time you press the button: → 30 → 60 → 90 → 120 → OFF The system is turned off after the set time has elapsed. To cancel the sleep timer: Press [SLEEP] to select "OFF". To confirm the remaining time: (only while system is ON) Press [SLEEP]. To change the time remaining during operation: Press [SLEEP] to show the remaining time then press [SLEEP] to select the desired time. Notes • The sleep timer turns OFF automatically the moment you attempt to edit-record a CD using CD Manager function. • The sleep timer can be used in combination with the play/record timer. The sleep timer always has priority. Be sure not to overlap timer settings. B Using an external unit Listening to an external source (See page 7 for external unit connection) 1. Press [f/7, POWER] to turn the unit on. 2. Press [SELECTOR] to select "AUX". Every time you press the button: CD → TAPE → TUNER → AUX 3. Start playback from the external source. (For details, refer to the owner's manual of the equipment.) Recording from an external source 1. Follow steps 1-3 on page 19. 2. Press [SELECTOR] to select "AUX". 3. Press [a REC/J] (recording starts). 4. Start playback from the external source. (For details, refer to the owner's manual of the equipment.) C Listening with headphones Reduce the volume level, and connect the headphones. Plug type: 3.5 mm (1/8˝) stereo Note Avoid listening for prolonged periods of time to prevent hearing damage.