Panasonic SAPT660 Dvd Home Theater Sound System - Page 6

Simple Setup Positioning Notes on speaker use ≥Use only supplied speakers Using other speakers can damage the unit, and sound quality will be negatively affected. ≥ You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. ≥ Reduce the volume in the following cases to avoid damage: - When playing distorted sound. - When the speakers are reverberating due to a record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument. - When adjusting the sound quality. - When turning the unit on or off. 2 Fit the speaker securely onto the screw(s) with the hole(s). e.g. [PT660] e.g. [PT660] Front speaker Center speaker 190 mm (7 15/32q) If irregular coloring occurs on your TV The center speaker is designed to be used close to a TV, but the picture may be affected with some TVs and setup combinations. If this occurs, turn the TV off for about 30 minutes. The demagnetizing function of the TV should correct the problem. If it persists, move the speakers further away from the TV. e.g. [PT660] Surround speaker Caution ≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/ or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. ≥ Do not attempt to attach these speakers to walls using methods other than those described in this manual. Caution ≥ Do not touch the front netted area of the speakers. Hold by the sides. e.g. Center speaker e.g. [PT754] Front speaker Attach to a wall without the base and the stand e.g. DO NOT In this position, the speaker will likely fall if moved to the left or right. DO DO NOT ≥ Do not stand on the base. Be cautious when children are near. e.g. [PT754] Front speaker Move the speaker so DO that the screw is in this position. DO NOT Speaker installation options ∫ Attaching to a wall You can attach all of the speakers (except subwoofer) to a wall. ≥ The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 Ibs) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers. 1 Drive a screw (not included) into the wall. At least 30 mm (13/16q) ‰4.0 mm (5/32q) ‰7.0 mm to 9.4 mm (9/32q to 11/32q) ∫ Fitting speaker stands (not included) (Except subwoofer) Ensure the stands meet these conditions before purchasing them. Note the diameter and length of the screws and the distance between screws as shown in the diagram. ≥ The stands must be able to support over 10 kg (22 Ibs). ≥ The stands must be stable even if the speakers are in a high position. e.g. Center speaker Metal screw holes For attaching to speaker stands 5.0 mm (3/16q), pitch 0.8 mm (1/32q) Plate thickness plus 7.0 mm to 10 mm (plus 9/32q to 13/32q) 60 mm (23/8q) Speaker stand (not included) Wall or pillar 4.0 mm to 6.0 mm (5/32q to 1/4q) RQTX0094 6