Panasonic SAPT770 Dvd Theater Receiver - Page 14

Getting Started Playing Discs Setting up the radio (continued) Numbered buttons 123 456 789 0 10 Presetting stations manually Up to 30 stations can be set in each band, FM and AM. 1 While listening to the radio broadcast Press [OK]. 2 While the frequency is flashing on the display Press the numbered buttons to select a channel. ≥ To select a 2-digit number e.g. 12: [S10] B [1] B [2] SKIP SKIP , OK OK MEMORY VOLUME SELECTOR TUNE Alternatively, press [X, W], and then press [OK]. Main unit: 1 While listening to the radio broadcast Press [MEMORY] twice. 2 While a channel number is flashing on the display Press [X TUNE W], and then press [MEMORY]. A station previously stored is overwritten when another station is stored in the same channel preset. FM frequency step Main unit only The step is factory-set to 0.2-MHz, but you can change it to receive broadcasts allocated in 0.1-MHz steps. You may need to change this setting if the tuner seems to skip over the correct frequency for stations in your area. 1 Press [SELECTOR] to select "FM". 2 Press and hold [SELECTOR]. After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed. e.g. 87.9 (Factory preset) ,# 87.5 To return to the original step, repeat steps 1 and 2. [Note] After changing the setting, previously preset frequencies will be cleared. Preset them again. Other Operations Reference RQTX0221 14