Panasonic SAPT956 Home Theater Sound System - Page 5

[PT960] PT956 : Front speakers Make sure you have all the indicated components before starting assembly, setup, and connection. 2 Front speakers 2 Stands (with cable) 2 Bases 8 Screws Simple Setup Assembling the speakers Slide into the groove. Tighten securely. Position the cable between the ridges. Leave about 90 mm (317/32z) Speaker assembly option Insert the wire fully. i: White j: Blue Push! Press into the groove. Tighten securely. Thread the speaker cable through the base. Leave about 100 mm (315/16z) Attach the speaker. You can remove and use the cable from the stand. To reattach the cable, refer to page 7. Insert the wire fully. i: White j: Blue Push! Press into the groove. Tighten securely. ∫ Preventing the speakers from falling ≥ You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened. ≥ Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers. e.g. [PT760] [PT954] Front speakers e.g. [PT960] PT956 Front speakers String (not included) Thread from the wall to the speaker and tie tightly. String (not included) Thread from the wall to the speaker and tie tightly. RQTX0105 Rear of the speaker Screw eye (not included) Wall Approx. 150 mm (529/32z) Rear of the speaker Screw eye (not included) Wall Approx. 150 mm (529/32z) 5