Panasonic SAXR10 SAXR10 User Guide - Page 23

Specifications (IHF'78) s AMPLIFIER SECTION Rated minimum sine wave RMS power output 20 Hz-20 kHz both channels driven 0.9 % total harmonic distortion 100 W per channel (6 Ω) 1 kHz continuous power output both channels driven 0.3 % total harmonic distortion 100 W per channel (6 Ω) Total harmonic distortion rated power at 20 Hz-20 kHz 0.9 % (6 Ω) half power at 1 kHz 0.08 % (6 Ω) Power output at 1kHz each channel driven 0.9 % total harmonic distortion Front 2 x 100 W (6 Ω) Center 100 W (6 Ω) Surround 2 x 100 W (6 Ω) Load impedance Front 6-8 Ω Center 6-8 Ω Surround 6-8 Ω Frequency response DVD/DVD 6CH, VCR, TV 10 Hz-44 kHz, ±3 dB Input sensitivity DVD/DVD 6CH, VCR, TV 27 mV (200 mV, IHF '66) S/N (IHF A) DVD, TV (DIGITAL INPUT) 90 dB (98 dB, IHF '66) Input impedance DVD/DVD 6CH, VCR, TV 22 kΩ Tone controls BASS 50 Hz, +10 to -10 dB TREBLE 20 kHz, +10 to -10 dB Subwoofer frequency response (-6 dB) 7-200 Hz Digital input Optical 2 Coaxial 1 Product Service s FM TUNER SECTION Frequency range Sensitivity 50 dB quieting sensitivity MONO STEREO Total harmonic distortion MONO STEREO S/N MONO STEREO Frequency response Alternate channel selectivity Capture ratio Image rejection at 98 MHz Spurious response rejection at 98 MHz AM suppression Stereo separation 1 kHz 10 kHz Antenna terminal 87.9-107.9 MHz 11.2 dBf (2 µV, IHF '58) 18.3 dBf (4.5 µV, IHF '58) 38.3 dBf (45 µV, IHF '58) 0.2 % 0.3 % 73 dB 67 dB 20 Hz-15 kHz, +1 dB, -2 dB 65 dB 1.5 dB 40 dB 75 dB 50 dB 40 dB 30 dB 75 Ω (unbalanced) s AM TUNER SECTION Frequency range Sensitivity Selectivity IF rejection at 1000 kHz 530-1710 kHz 20 µV, 330 µV/m 55 dB 50 dB s VIDEO SECTION Output voltage at 1 V input (unbalanced) Maximum input voltage Input/output impedance 1±0.1 Vp-p 1.5 Vp-p 75 Ω s GENERAL Power supply Power consumption Dimensions (W x H x D) Mass AC 120 V, 60 Hz 115 W 430 x 52 x 334 mm (16-15/16'' x 2-1/16'' x 13-5/32'') 3.5 kg (7.7 lb.) Power consumption in standby mode: 1 W Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 1. Damage requiring service - The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or the plug has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing - Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts - When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check - After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. Product information For product information or assistance with product operation: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-2117262, or e-mail [email protected], or web site (http://www.panasonic.com). In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, web site (www.panasonic.ca), or an authorized Servicentre closest to you. RQT6501 Reference 23