Panasonic SAXR700 SAXR700 User Guide - Page 49
Help message, Specifications
View all Panasonic SAXR700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Help message Reference Troubleshooting guide/Help message/Specifications Message 1 2 3 4 5 Cause/countermeasure Muting is on. Press [MUTING] on the remote control to cancel the function (á page 31). The selected mode is not "MUSIC ". Change the mode to "MUSIC " (á pages 28 and 29). Center and surround speakers are not connected, or they are set as absent. Connect the speakers (á page 9) or change their setting to present (á page 35). Surround and surround back speakers are not connected, or they are set as absent. Connect the speakers (á page 9) or change their setting to present (á page 35). Surround back speakers are not connected, or they are set as absent. Connect the speakers (á page 9) or change their setting to present (á page 35). Message 6 7 8 9 10 (flashing) 11 12 Cause/countermeasure You are trying to use the effect unavailable for DTS-ES sources. You are trying to use the effect unavailable for DVD-Audio sources. You are trying to use the effect unavailable for DVD analog 6-channel playback. You are trying to use the effect unavailable for the current input source. The unit is in the "PCMFIX " mode. Cancel this mode (á page 37). "SPEAKERS A" is off. Select "SPEAKERS A" (á pages 12 and 26). "SPEAKERS A" and "SPEAKERS B" are off. Select "SPEAKERS A" or "SPEAKERS B" (á pages 12, 26 and 27). Specifications (IHF'78) n AMPLIFIER SECTION Rated minimum sine wave RMS power output 20 Hz-20 kHz both channels driven 0.09 % total harmonic distortion 100 W per channel (6 Ω) 1 kHz continuous power output both channels driven 0.09 % total harmonic distortion 105 W per channel (6 Ω) Total harmonic distortion rated power at 20 Hz-20 kHz 0.09 % (6 Ω) Power bandwidth both channels driven, -3 dB 4 Hz to 88 kHz (6 Ω, 0.9 %) Power output each channel driven 0.9 % total harmonic distortion at 1 kHz Front (L/R) 100 W (6 Ω) Center 100 W (6 Ω) Surround (L/R) 100 W (6 Ω) Surround Back (L/R) 100 W (6 Ω) Load impedance Front (L/R) A or B 6 to 8 Ω A and B 6 to 8 Ω BI-WIRE 6 to 8 Ω Center 6 to 8 Ω Surround (L/R) 6 to 8 Ω Surround Back (L/R) 6 to 8 Ω Frequency response CD, AUX, TV/STB, VCR, DVD RECORDER, BD/DVD PLAYER 4 Hz to 88 kHz, ±3 dB DVD 6CH 4 Hz to 44 kHz, ±3 dB Input sensitivity CD, AUX, TV/STB, VCR, DVD RECORDER, BD/DVD/DVD 6CH 27 mV (200 mV, IHF '66) Input impedance CD, AUX, TV/STB, VCR, DVD RECORDER, BD/DVD/DVD 6CH 22 kΩ S/N (IHF A) CD, TV/STB, BD/DVD PLAYER, DVD RECORDER (Digital Input) 85 dB (103 dB, IHF '66) Tone controls BASS 50 Hz, +10 to -10 dB TREBLE 20 kHz, +10 to -10 dB Subwoofer frequency response (- 6 dB) 7 Hz to 200 Hz Digital input (OPTICAL) 2 (COAXIAL) 2 HDMI (Version 1.2a) Input Output n FM TUNER SECTION Frequency range Sensitivity 50 dB quieting sensitivity MONO STEREO Total harmonic distortion MONO STEREO 2 1 87.9 to 107.9 MHz 11.2 dBf (2 µV, IHF '58) 18.3 dBf (4.5 µV, IHF '58) 38.3 dBf (45 µV, IHF '58) 0.2 % 0.3 % S/N MONO STEREO Frequency response Alternate channel selectivity Capture ratio Image rejection at 98 MHz Spurious response rejection at 98 MHz AM suppression Stereo separation 1 kHz 10 kHz Antenna terminal 73 dB 67 dB 20 Hz to 15 kHz, +1 dB, -2 dB 65 dB 1.5 dB 40 dB 75 dB 50 dB 40 dB 30 dB 75 Ω (unbalanced) n AM TUNER SECTION Frequency range Sensitivity Selectivity IF rejection at 1000 kHz 530 to 1710 kHz 20 µV, 330 µV/m 55 dB 50 dB n VIDEO SECTION Output voltage at 1 V input (unbalanced) 1±0.1 Vp-p Maximum input voltage 1.5 Vp-p Input/output impedance 75 Ω S-Video Input BD/DVD PLAYER, DVD RECORDER, TV/STB Output TV MONITOR Component Video Input DVD RECORDER, TV/STB Output TV MONITOR n GENERAL Power supply Power consumption Dimensions (W x H x D) Mass AC 120 V, 60 Hz 140 W 430 mm x 107.5 mm x 390 mm (16-15/16'' x 4-7/32'' x 15-11/32'') Approx. 5.3 kg (11.7 lb.) n DIN POWER 1 kHz, T. H. D. 1 % 2 x 100 W (6 Ω) Power consumption in standby mode: Power consumption in HDMI off mode: 0.7 W 0.3 W Notes: 1. Specifications are subject to change without notice. 2. Total harmonic distortion is measured by the digital spectrum analyzer. Marking sign is located on bottom of the unit. 49 RQT8739