Panasonic SB-C700 Owners Manual - Page 9
Connecting with an amplifier
![]() |
View all Panasonic SB-C700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Connecting with an amplifier ≥ Before connection, turn off the amplifier and disconnect its power cord. ≥ For details, refer to the operating instructions of the amplifier. e.g., SU-C700 1 Turn the knobs to loosen them, and insert the core wires into the holes. 2 Tighten the knobs. Speaker (right) To the right speaker Cable with a red line Cable with a red line To the left speaker Speaker (left) ≥ Do not move the speaker while the speaker cables are connected. This may cause a short circuit. ≥ When the connections are completed, pull the speaker cables lightly to check that they are connected firmly. ≥ Wire the polarity (+/-) of the terminals correctly. Not doing so may adversely affect stereo effects or cause malfunction. 9
![](/manual_guide/products/panasonic-sbc700-owners-manual-448513c/9.png)
9
English
≥
Before connection, turn off the amplifier and disconnect its power cord.
≥
For details, refer to the operating instructions of the amplifier.
±
≥
Do not move the speaker while the speaker cables are connected. This may cause a short circuit.
≥
When the connections are completed, pull the speaker cables lightly to check that they are connected firmly.
≥
Wire the polarity (+/-) of the terminals correctly. Not doing so may adversely affect stereo effects or cause malfunction.
Connecting with an amplifier
SU-C700
Speaker (left)
Speaker (right)
e.g.,
1
Turn the knobs to loosen them, and insert the core wires into
the holes.
2
Tighten the knobs.
Cable with a red line
To the left speaker
Cable with a red line
To the right speaker