Panasonic SC-EN25 Cd Radio Cassette - Page 4

Radio operations Radio stations can be tuned manually by selecting the station's frequency or they can be preset into channels to make it easy to tune. You can preset up to 20 FM channels and up to 12 AM channels. To adjust the volume 0 (Minimum) 50 (Maximum) OPEN/ DISPLAY CLOSE SLEEP 1 2 3 CLOCK/ TIMER ADJ 4 5 6 TIMER SET/CHECK 7 8 9 PGM/CLEAR -AUTO PRESET 0 >=10 MUSIC PORT TUNER/ CD BAND VOL VOL SOUND LIVE PLAY EQ VIRTUALIZER MODE ALBUM Input using the numbered buttons To select a 2-digit number e.g. 11: [ 10] → [1] → [1] To adjust the volume SC-EN27 SC-EN25/SC-EN26 u ALBUM i PRESET TUNE Allocation settings Each country allocates broadcast bands according to their particular system. You can change the FM step. The step is factory-set to 0.2 MHz, but you can change it to receive broadcasts allocated 0.1-MHz steps. Any FM frequencies preset in channels will be changed by this procedure. Preset them again. 1. Select the AM band with [TUNER/BAND]. 2. Press and hold [TUNER/BAND] on the unit. After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed. To return to the original step, repeat the above steps. Note The preset memory will be initialized when you change the frequency step. To improve reception FM AM Receive the radio stations after connecting the antenna. Then attach the antenna code on the wall or pillar in the good reception. Change the direction and location of the antenna. If noise is excessive in FM You can improve FM reception by switching reception to monaural. MONO Press to turn the MONO mode ON/OFF Manual tuning Main unit Select "FM" or "AM" Remote control TUNER/ BAND Select the frequency 34 u i Select "FM" or "AM" Select the frequency 4 Auto tuning Main unit Select "FM" or "AM" Remote control Press and hold until the frequency starts changing rapidly TUNER/ BAND 34 u i Select "FM" or "AM" Press and hold until the frequency starts changing rapidly • Auto tuning stops when it finds a station. • To cancel auto tuning press the same button again. Note • Auto tuning may not function when there is excessive interference. Automatic presetting The tuner presets the stations it can receive into channels in ascending order. Perform once for FM stations and once for AM stations. TUNER/ BAND Select "FM" or "AM" Note Press and hold until "AUTO" appears During automatic presetting, the memory indicator ( PGM ) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset. The first station to be preset is displayed when presetting finishes. Manual presetting Preset the stations one at a time. Tune to the signal you want to set as the preset. Within 10 seconds Enter preset mode 1 2 3 4 5 6 7 8 9 0 >=10 Note PGM Select a channel The station occupying a channel is erased if another station is preset over that channel. Selecting channels SC-EN27 SC-EN25/SC-EN26 Select "FM" or "AM" Select a channel Select "FM" or "AM" Select a channel