Panasonic SC-GN01 Owners Manual - Page 15
Sound positioning mode, Opening sound settings, buttons
View all Panasonic SC-GN01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Operation Sound positioning mode It may not be possible to achieve a suitable surround effect due to the difference in positioning between the front and back speakers compared to the ear when the unit is placed on your shoulders. You can make allowances so that it sounds suitable by adjusting the audio output of the speakers. Forward setting Standard (centre) (Factory default) Backward setting 1 While pressing the [MIC MUTE] button, press the [MUTE] button. • An operation tone is made and the unit is in the sound positioning mode. • When the unit enters the sound positioning mode, the operation indicator blinks four times each time. 2 While the unit is in the sound positioning mode, press the [i VOL j] buttons to adjust. • Pressing the [i VOL] button sets the speaker sound position forwards. • Pressing the [VOL j] button sets the speaker sound position backwards. • An operation tone is made when set to forward, standard (centre), or backward. 3 Press any button other than the [i VOL j] buttons to complete the settings. • The settings are also completed if the unit is left in the sound positioning mode for 10 seconds or more. Note: • The setting is maintained until it is changed again. Opening sound settings An opening sound is made when you turn on this unit. Use the following procedure to turn off the opening sound (so the sound is not made). To turn the opening sound off Press and hold the [MUTE] button for 10 or more seconds. • An operation tone is made and the opening sound is turned off. • To turn the sound on again, press and hold the [MUTE] button for 10 seconds again. Note: • The setting is maintained until it is changed again. 15