Panasonic SC-HT56 Home Theater - Page 14

Settings Switch on. Display Settings HDMI settings • • To reduce standby power consumption. Choice for turning off the VIERA Link "HDAVI ControlTM" (➡ page 8). Standby selection OFF: Standby power consumption reduced (approximately 0.3 W). • Signals from DVD equipment cannot pass through HDMI connection to the television when the unit is in standby (➡ page 8). • VIERA Link "HDAVI Control" (➡ page 8) does not work when the unit is in standby. ON: Normal standby power consumption (factory setting) VIERA Link "HDAVI Control" OFF: VIERA Link "HDAVI Control" is OFF ON: VIERA Link "HDAVI Control" is ON (factory setting) 2a HDMI 2b 3 STNBY CTRL OFF ON DRCOMP (Dynamic range compression) • Change this setting to listen to software recorded with Dolby Digital at low volume (such as late at night) and maintain audio clarity. It reduces the peak level in loud scenes without affecting the sound field. OFF: The software is played with the original dynamic range (factory setting). STANDARD: The level recommended by the producer of the software for household viewing. MAX: The maximum allowable compression (recommended for night viewing). Attenuator (A/D Attenuator) • Turn the A/D attenuator on if "OVERFLOW" lights frequently when using 2-channel analog input. The factory setting is OFF. DRCOMP OFF STANDARD MAX ATTENUATOR OFF ON TV delay • Delay audio if there appears to be a difference in timing between audio and pictures. The factory setting is ON. TV DELAY OFF ON Adjusting speaker output level C (center), RS (surround right) and LS (surround left) can be adjusted between -6 dB and VOL +6 dB, with 0 dB being the level of the front speakers. Adjust center and surround output to the same apparent level of the front speakers. For SUBW (subwoofer), you can select "SUBW OFF" so there is no output, "SUBW MIN" for minimum output, a level between 1 and 19, or "SUBW MAX" for maximum output. Adjust subwoofer output so it is balanced with the front speakers. Output the signal. Adjust the main volume. VOL RQTX0175 Press and hold. TEST L L C R RS LS SUBW 14 Select the speaker Adjust the level. channel. C +4dB Repeat for each speaker channel Stop the test signal. Press and hold.