Panasonic SC-HTB01 Basic Operating Instructions - Page 8

Bluetooth® connection By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly. • Refer to the operating instructions of the Bluetooth® device for further instruction on how to connect a Bluetooth® device. Preparation • Turn on the Bluetooth® feature of the device and place the device near this system. Bluetooth® pairing 1 Press [ ] to select " ". • If the " " indicator flashes quickly, go to step 3. 2 Press and hold [ ] until the " " indicator flashes quickly. • If the " " indicator flashes slowly, repeat step 2. 3 Select "SOUNDSLAYER" from the Bluetooth® device's Bluetooth® menu. • If prompted for the passkey on the Bluetooth® device, enter "0000". • Once the Bluetooth® device is connected, the " " indicator stops flashing and lights up. • You can register up to 8 devices with this system. If a 9th device is paired, the device that has not been used for the longest time will be replaced. Connecting a paired Bluetooth® device 1 Press [ ] to select " ". • If the " " indicator lights, a Bluetooth® device is already connected with this system. Disconnect it. (> below) 2 Select "SOUNDSLAYER" from the Bluetooth® device's Bluetooth® menu. ∫ Disconnecting a Bluetooth® device Press and hold [ ] until the " " indicator flashes. About Bluetooth® Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ∫ Frequency band used This system uses the 2.4 GHz frequency band. ∫ Certification of this device • This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. • The action below are punishable by law in some countries: - Taking apart or modifying the unit. - Removing specification indications. ∫ Restrictions of use • Wireless transmission and/or usage with all Bluetooth® equipped devices is not guaranteed. • All devices must conform to standards set by Bluetooth SIG, Inc. • Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. • This system supports Bluetooth® security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution. • This system cannot transmit data to a Bluetooth® device. ∫ Range of use Use this device at a maximum range of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference. ∫ Interference from other devices • This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this system is located too close to other Bluetooth® devices or the devices that use the 2.4 GHz band. • This system may not function properly if radio waves from a nearby broadcasting station, etc. are too strong. ∫ Intended usage • This system is for normal, general use only. • Do not use this system near equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. • More detailed operating instructions are available in "Owner's Manual (PDF format)". (> cover) • This system can only be connected to one device at a time. To return to the factory defaults. While this system is on, press and hold [Í/I] on this system for more than 4 sec. (All the indicators will blink twice when this system is reset.) 8 TQBS0397 For further dedicated help, support and advice about this system please visit: https://panasonic.jp/support/global/cs/ (This site is in English only.)