Panasonic SC-MAX670 SC-MAX670 Owner's Manual (Multi Language) - Page 11

Clock and timers, Link mode, Disconnecting a device, Setting the clock, Play timer

Page 11 highlights

ENGLISH Link mode You can change the transmission speed to prioritize transmission quality or sound quality. Preparation If this system is connected to a Bluetooth® device, disconnect it (> "Disconnecting a device"). 1 Press [PLAY MENU] to select "LINK MODE". 2 Press [2, 1] to select "MODE 1" or "MODE 2" and then press [OK]. • MODE 1 Emphasis on connectivity. • MODE 2 Emphasis on sound quality. Note: The default setting is "MODE 2". Disconnecting a device 1 Press [PLAY MENU] repeatedly to select "DISCONNECT?". 2 Press [2, 1] to select "OK? YES" and then press [OK]. Note: A device is disconnected when you: • Select a different source. • Move the device out of the maximum range. • Disable the Bluetooth® transmission of the device. • Switch off the system or the device. Clock and timers Setting the clock This is a 12-hour clock. 1 Press [CLOCK/TIMER] to select "CLOCK". 2 Within 20 seconds, press [3, 4] to set the time. 3 Press [OK]. Press [CLOCK/TIMER] to show the clock for a few seconds. Note: • Reset the clock regularly to maintain accuracy. • The clock is reset when there is a power failure or when the AC power supply cord is removed. Play timer Except for Bluetooth® source You can set the timer to come on at a certain time to: • Wake you up Preparation Set the clock. 1 Press [CLOCK/TIMER] to select " PLAY". 2 Within 10 seconds, press [3, 4] to set the start time. 3 Press [OK]. 4 Do steps 2 and 3 again to set the end time. 5 Press [3, 4] to select the source you want to play and then press [OK]. To start the timer 1 Prepare the audio source. Prepare the music source you want to listen to (disc, USB, radio or external equipment) and set the volume. 2 Press [PLAY ] to select " PLAY ON". " PLAY ON" is shown. To cancel, press [PLAY ] again. The system must be switched off for the timer to operate. To check the settings Press [CLOCK/TIMER] to select " PLAY". Note: • The play timer starts at a low volume and increases gradually to the preset level. • The timer comes on at the set time every day if the timer is on. VQT5F35 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

11
VQT5F35
ENGLISH
You can change the transmission speed to prioritize
transmission quality or sound quality.
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
>
“Disconnecting a device”).
1
Press [PLAY MENU] to select “LINK MODE”.
2
Press [
2
,
1
] to select “MODE 1” or “MODE 2”
and then press [OK].
Note:
The default setting is “MODE 2”.
1
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2
Press [
2
,
1
] to select “OK? YES” and then
press [OK].
Note:
A device is disconnected when you:
Select a different source.
Move the device out of the maximum range.
Disable the Bluetooth
®
transmission of the device.
Switch off the system or the device.
Clock and timers
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
2
Within 20 seconds, press [
3
,
4
] to set the time.
3
Press [OK].
Press [CLOCK/TIMER] to show the clock for a few
seconds.
Note:
Reset the clock regularly to maintain accuracy.
The clock is reset when there is a power failure or when the
AC power supply cord is removed.
Except for Bluetooth
®
source
You can set the timer to come on at a certain time to:
Wake you up
Preparation
Set the clock.
1
Press [CLOCK/TIMER] to select “
PLAY”.
2
Within 10 seconds, press [
3
,
4
] to set the start
time.
3
Press [OK].
4
Do steps 2 and 3 again to set the end time.
5
Press [
3
,
4
] to select the source you want to
play and then press [OK].
To start the timer
1
Prepare the audio source.
Prepare the music source you want to listen to (disc,
USB, radio or external equipment) and set the
volume.
2
Press [PLAY
] to select “
PLAY ON”.
PLAY ON” is shown.
To cancel, press [PLAY
] again.
The system must be switched off for the timer to
operate.
To check the settings
Press [CLOCK/TIMER] to select “
PLAY”.
Note:
The play timer starts at a low volume and increases
gradually to the preset level.
The timer comes on at the set time every day if the timer is
on.
Link mode
MODE 1
Emphasis on connectivity.
MODE 2
Emphasis on sound quality.
Disconnecting a device
Setting the clock
Play timer