Panasonic SC-PMX9 SC-PMX9 Wi-Fi Connection Guides (English) - Page 1
Panasonic SC-PMX9 Manual
View all Panasonic SC-PMX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
CD Stereo System Model No. SC-PMX9 VQC9787 Wi-Fi® connection guide You can wirelessly stream music from an iOS device, an AndroidTM device or a Mac/PC to SC-PMX9's speakers. To use this music-streaming feature, SC-PMX9 must join the same 2.4 GHz wireless network as the compatible device through the wireless network router (access point). ≥ For information on how to connect with a LAN cable, refer to "Wired LAN connection" in the Owner's Manual. Start wireless network settings Preparation 1 Place SC-PMX9 close to the wireless network router as possible and then point the antenna on the rear of the main unit up as shown in the figure. ≥ Do not tilting the antenna forward or backwards when it is pointing up. 2 Connect the AC power supply cord while the LAN cable is disconnected. 3 Turn this system on. 4 Follow the chart below to choose the network setting method. ≥ If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced setting, refer to "Method 4" in the Owner's Manual. Does your wireless network router support WPS (Wi-Fi Protected SetupTM)? Yes No / Do not know iOS device*1, Android device Wireless network or Mac/PC router *1: Refer to the Operating Instructions for the compatibility. Screen images used in this sheet : iPhone 4S, iOS 6.0.1 SC-PMX9 Are you using an iPod touch/iPhone/iPad? Is the iOS version 5.0 or later? Yes No Method 1 Method 2 1 Press [SETUP] on the remote control repeatedly to select "Net Setup" and then press [OK]. "With iPod" is indicated on the display. 2 Press [SETUP] on the remote control repeatedly to select "WPS Push" and then press [OK]. "WPS" flashes on the display. 3 Press the WPS button on the wireless network router. The following explanations are based on an iPhone. 1 Disconnect iPod/iPhone/iPad connected to the main unit. 2 Connect the iPhone to your home wireless network. 4 Press [SETUP] on the remote control repeatedly to select "Net Setup" and then press [OK]. "With iPod" is indicated on the display. 5 Unlock your iPhone and then press [OK] on the remote control. 3 Connect the iPhone to the main unit. Choose one of the following connections. 6 A message will pop-up on the iPhone. Allow the iPhone to share the wireless network settings. Lightning connector compatible iPod touch/iPhone: 2 The settings are completed when "Success" is displayed and " " is indicated on the display. iPod touch/iPhone/iPad with iOS 5.0 or later: 7 The settings are completed when "Success" is displayed and " " is indicated on the display. 8 Press [OK] on the remote control to exit. Method 3 3 Start "Panasonic Stereo System Network Setup" on your smartphone and follow the indications. You can make the wireless network settings with the app, "Panasonic Stereo System Network Setup" (for free). If you're using an Android device, download the app at Google PlayTM. If you're using an iPod touch/iPhone/ iPad, download it at the App Store. Preparation ≥ Connect your smartphone to your home wireless network. ≥ Check the password for your home wireless network. ∫ Note for the iOS version After step 3 1 Enter the password for the home wireless network to which the iOS device is connected. 2 When a message instructing you to connect the iOS device to this system is displayed, press the home button. 3 On the Wi-Fi network selection screen in "Settings", select "00 Setup 1 Press [SETUP] on the remote control repeatedly to select "Net Setup" and then press [OK]. 4 When a message indicating the "With iPod" is indicated on the display. completion of the connection to 2 Press [SETUP] on the remote control repeatedly to select this system is displayed, restart the app. "Manual" and then press [OK]. iPad 4 Press [OK] on the remote control to exit. Dedicated cable supplied with the iOS device *2 : The marking may differ. 5 When a message indicating the completion of the Wi-Fi setup of this system is displayed, close the app, and then check the operation of AirPlay, etc. Using AirPlay The following explanations are based on an iPhone. 1 Connect the iPhone to your home wireless network. ≥ AirPlay, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. ≥ App Store is a service mark of Apple Inc. ≥ Android and Google Play are trademarks of Google Inc. ≥ The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. ≥ The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. ≥ "Wi-Fi" and "Wi-Fi Protected Setup" are marks or registered marks of the Wi-Fi Alliance. ≥ All other trademarks are trademarks of their respective owners. If you have any questions, visit: U.S.A.: www.panasonic.com/support Canada: www.panasonic.ca/english/support "Settings" "Wi-Fi" Turn on Your home wireless network name (SSID)*3 *3: You may be prompted for the password. Enter the password of your home wireless network. 2 Select "Panasonic PMX9 from the AirPlay icon and start play. "Music" ɹ ɹ "Panasonic PMX9 ɹ ɹ ɹ ɹ Play starts. (with a slight delay)