Panasonic SCBT7399 SABT7399 User Guide - Page 1

Easy Setting Guide The order of setting 1 Prepare the speakers See below 2 Place the speakers See below 3 Connect the cables See over 1 Prepare the speakers Step 1   Slide into the  groove. 3  1 2  Tighten securely. Front speaker Stand Step 2  Position the cable between the ridges.  Leave about 120 mm (4 23/32) Base  Insert the wire fully, taking care not to insert beyond the wire insulation. : White : Blue line PUSH! 4  Press into the groove.  Tighten securely. Step 3 Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. Be sure to match the number on each sticker with the circled number in the illustration. Step 4 Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. : White : Blue line e.g., Front speaker Lch Subwoofer PURPLE WHITE FRONT Lch 1 ˠ speaker White  PUSH! Blue line Center speaker GREEN   Front speakers Rch Lch RED WHITE Surround speakers Rch GRAY Lch BLUE       Speakers  Refer to the rear label of the speaker before connecting the e.g., Front speakers FRONT/AVANT corresponding cable. Verify the type of speaker with the label on the rear of the Center speaker CENTER/CENTRE speaker.  Surround speakers SURROUND/AMBIOPHONIE Blu-ray Disc Home Theater Sound System Model No. SC-BT330 4 Turn on the main unit Smart setup See Smart setup screen See over 2 Place the speakers WHITE Main unit's front panel SETUP MIC RED L R GREEN C BLUE PURPLE LS Auto speaker setup microphone (included) Place the Auto speaker setup microphone at the actual seating position. (At ear level when seated.) SW GRAY RS Recommended Front speakers (L, R) Surround speakers (LS, RS) 60 120 VQC7399 F1209RE0