Panasonic SCHC37 SCHC37 User Guide - Page 10

Listening to the radio You can preset up to 30 channels. Preparation Make sure that the FM antenna is connected. (> 8) A station previously stored is overwritten when another station is stored in the same channel preset. Presetting stations automatically 1 Press [RADIO] to select "FM". 2 Press [PLAY MENU] repeatedly to select "A.PRESET" and then press [OK]. 3 Press [3, 4] to select "LOWEST" or "CURRENT" and then press [OK]. LOWEST: To begin auto preset with the lowest frequency (FM 87.9 or FM 87.5). CURRENT: To begin auto preset with the current frequency.* * To change the frequency, refer to "Manual tuning and presetting". The tuner starts to preset all the stations it can receive into the channels in ascending order. To preset the channel 5 While listening to the radio broadcast Press [OK]. 6 Press [3, 4] to select the channel and then press [OK]. ∫ To improve FM sound quality 1 While receiving FM broadcasts, press [PLAY MENU] repeatedly to select "FM MODE" and then press [OK]. 2 Press [3, 4] to select "MONO" and then press [OK]. ≥ This setting can be preset and memorized. To do so, continue to step 5 of "Manual tuning and presetting". ≥ Select "STEREO" in step 2 to return to stereo broadcasts. ≥ "MONO" is canceled if the frequency is changed. ≥ If "MONO" is selected, regardless of the type of signal this unit is receiving, "FM MONO" is displayed when [DISPLAY] is pressed. (> below) ∫ To display the current signal status Press [DISPLAY]. "FM ST": The FM signal is in stereo. "FM": The FM signal is in monaural. ≥ "FM" is also displayed even if this unit is not tuned to a station. Listening to a preset channel Preparation 1 Press [RADIO] to select "FM". 2 Press [PLAY MENU] repeatedly to select "TUNEMODE" and then press [OK]. 3 Press [3, 4] to select "PRESET" and then press [OK]. 1 Press [RADIO] to select "FM". 2 Press [:/6] or [5/9] to select the channel. ∫ Manual tuning and presetting Select a radio broadcast. 1 Press [RADIO] to select "FM". 2 Press [PLAY MENU] repeatedly to select "TUNEMODE" and then press [OK]. 3 Press [3, 4] to select "MANUAL" and then press [OK]. 4 Press [:/6] or [5/9] to tune to the required station. ≥ To start automatic tuning, press and hold 10 [:/6], [5/9] until the frequency starts scrolling. Tuning stops when a station is found. RQT9633 ≥ "STEREO" is displayed when this unit tunes to a stereo broadcast. Internet Radio This unit can output Internet radio if "vTuner for Panasonic" is installed on your iPhone/iPod touch. Preparation ≥ Install "vTuner for Panasonic" to your iPhone/ iPod touch. ≥ Install iOS 5.0 or later. 1 Insert the iPhone/iPod touch to this unit. 2 Press [iPod] repeatedly to select "VTUNER". {. "vTuner for Panasonic" starts. ≥ Visit the below website for the following information about "vTuner for Panasonic": http://radio.vtuner.com/panasonic/en/ (Compatible iPhone/iPod touch models and software versions, purchasing, installation and operation details.) ≥ A pop-up screen may appear on your iPhone/iPod touch. Follow the indicated instructions.