Panasonic SCHT17 SAHT15 User Guide - Page 7
Other speaker setup options, Attaching to a wall, Connect the speaker cables to the subwoofer.
View all Panasonic SCHT17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2 Connect the speaker cables to the subwoofer. SC-HT17 Subwoofer Step 1 Speaker setup Copper Silver SC-HT16 SC-HT15 FRONT (L) 1 FRONT (R) 2 6 Ω FRONT 4 Ω SURROUND 4 Ω CENTER Copper Silver 21 4 35 RL RL Other speaker setup options 4 SURROUND (R) 3 SURROUND (L) 5 CENTER Note Never short-circuit positive (+) and negative (-) speaker wires. Attaching to a wall Fitting optional speaker stands 30 - 35 mm (1-3/16" - 1-3/8") 180 mm (7-1/16") 7.5 -9.4 mm (19/64" - 3/8") Wall or pillar 7 - 9 mm (9/32" - 11/32") 3.0-4.0 mm (1/8" - 5/32") Screw (not included) 174 mm (6-7/8") SC-HT16 SC-HT15 Surround speakers SC-HT16 SC-HT15 Surround speakers 5 mm, Pitch 0.8 mm 60 mm (2-23/64") Speaker stands (not included) Plate thickness +7 to 10 mm (9/32" - 25/64") • The wall or pillar on which the speakers are to be attached should be capable of • Observe the diameter and length of the supporting 10 kg (22 lb.) per screw. Consult a qualified building contractor when screws and the distance between screws attaching the speakers to wall. Improper attachment may result in damage to the wall as shown in the diagram. and speakers. • The stands must be able to support over • When mounting the speakers to walls, use a string (not included) to prevent them 10 kg (22 lb.). RQT7949 from falling (è page 6). • The stands must be stable even if the • (SC-HT17: front and surround speakers, SC-HT16 and SC-HT15: front speakers) speakers are in a high position. Use of optional speaker cables are recommended when mounting. (You can also remove the speaker cables from the pipes supplied with this system.) 7