Panasonic SCPM23 SAPM23 User Guide - Page 15

Specifications, Maintenance

Page 15 highlights

ENGLISH English Specifications AMPLIFIER SECTION FTC OUTPUT POWER both channel driven simultaneously 10% total harmonic distortion 60 Hz to 20 kHz 18 W per channel (6 Ω) RMS OUTPUT POWER both channel driven simultaneously 10% total harmonic distortion 1 kHz 20 W per channel (6 Ω) Input impedance Music Port 250 mV 12 kΩ Output impedance HEADPHONE 16 Ω to 32 Ω Phone jack Terminal Stereo, 3.5 mm Music Port input jack Terminal Stereo, 3.5 mm FM TUNER SECTION Frequency range 87.9 MHz to 107.9 MHz (200 kHz steps) 87.5 MHz to 108.0 MHz (100 kHz steps) Sensitivity 1.5 µV (IHF) S/N 26 dB 1.0 µV Antenna terminals 75 Ω (unbalanced) Preset station FM 15 stations AM 15 stations AM TUNER SECTION Frequency range 520 kHz to 1710 kHz (10 kHz steps) Sensitivity S/N 20 dB (at 1000 kHz) 447 µV/m CASSETTE DECK SECTION Track system 4-track, 2-channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erase system AC erase 100 kHz Tape speed 4.8 cm/s (17/8 ips) Overall frequency response (+3, -6 dB) at DECK OUT Normal 35 Hz to 14 kHz S/N RATIO 47 dB (A weighted) Wow and flutter 0.08 % (WRMS) Fast-forward and rewind time Approx. 120 seconds with C-60 cassette tape CD SECTION Disc played [8 cm (3") or 12 cm (5")] (1) CD-Audio (CD-DA) (2) CD-R/RW (CD-DA, MP3, WMA formatted disc) (3) MP3/WMA Sampling frequency CD 44.1 kHz MP3/WMA 32 kHz, 44.1 kHz, 48 kHz Bit rate MP3/WMA 32 kbps to 384 kbps Decoding 16/20/24 bit linear Pick up Wavelength 785 nm Beam source Semiconductor laser Laser power CLASS 1 Audio output (Disc) Number of channels 2-channel Frequency response 20 Hz to 20 kHz (+1dB, -2 dB) Wow and flutter Below measurable limit Digital filter 8 fs D/A converter MASH (1 bit DAC) SPEAKER SECTION Type Speaker(s) FULL RANGE Impedance Input power (IEC) Output sound pressure Frequency range Dimensions (W x H x D) Mass 1 way, 1 speaker system 10 cm (4˝) twin cone type (6 Ω) 6 Ω 20 W (Max) 83 dB/W (1.0 m) 51 Hz to 23 kHz (-16 dB) 83 Hz to 22 kHz (-10 dB) 139 mm x 227 mm x 136 mm (515/32˝ x 815/16˝ x 511/32˝) 1.3 kg (2.9 lb.) GENERAL Power supply AC 120 V, 60 Hz Power consumption 57 W Dimensions (W x H x D) 165 mm x 227 mm x 285 mm (61/2˝ x 815/16˝ x 111/8˝) Mass 3.2 kg (7.1 lb.) Operating temperature range +5˚C to +35˚C (+41˚F to +95˚F) Operating humidity range 5 % to 90 % RH (no condensation) Power consumption in standby mode 0.6 W Note 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. English Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner, crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). RQTV0080 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

RQTV0080
15
ENGLISH
English
English
Specifications
AMPLIFIER SECTION
FTC OUTPUT POWER both channel driven simultaneously
10% total harmonic distortion
60
Hz to 20
kHz
18
W per channel (6
)
RMS OUTPUT POWER both channel driven simultaneously
10% total harmonic distortion
1
kHz
20
W per channel (6
)
Input impedance
Music Port
250
mV 12
k
Output impedance
HEADPHONE
16
to 32
Phone jack
Terminal
Stereo, 3.5
mm
Music Port input jack
Terminal
Stereo, 3.5
mm
FM TUNER SECTION
Frequency range
87.9
MHz to 107.9
MHz (200
kHz steps)
87.5
MHz to 108.0
MHz (100
kHz steps)
Sensitivity
1.5
μV (IHF)
S/N 26
dB
1.0
μV
Antenna terminals
75
(unbalanced)
Preset station
FM 15 stations
AM 15 stations
AM TUNER SECTION
Frequency range
520 kHz to 1710
kHz (10
kHz steps)
Sensitivity
S/N 20
dB (at 1000
kHz)
447
μV/m
CASSETTE DECK SECTION
Track system
4-track, 2-channel
Heads
Record/playback
Solid permalloy head
Erasure
Double gap ferrite head
Motor
DC servo motor
Recording system
AC bias 100
kHz
Erase system
AC erase 100
kHz
Tape speed
4.8
cm/s (1
7
/
8
ips)
Overall frequency response (+3, –6
dB) at DECK OUT
Normal
35
Hz to 14
kHz
S/N RATIO
47
dB (A weighted)
Wow and flutter
0.08
% (WRMS)
Fast-forward and rewind time
Approx. 120 seconds with C-60 cassette tape
CD SECTION
Disc played [8
cm (3") or 12
cm (5")]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3, WMA formatted disc)
(3) MP3/WMA
Sampling frequency
CD
44.1
kHz
MP3/WMA
32
kHz, 44.1
kHz, 48
kHz
Bit rate
MP3/WMA
32
kbps to 384
kbps
Decoding
16/20/24 bit linear
Pick up
Wavelength
785
nm
Beam source
Semiconductor laser
Laser power
CLASS 1
Audio output (Disc)
Number of channels
2-channel
Frequency response
20
Hz to 20
kHz
(+1dB, –2
dB)
Wow and flutter
Below measurable limit
Digital filter
8
fs
D/A converter
MASH (1
bit DAC)
SPEAKER SECTION
Type
1 way, 1 speaker system
Speaker(s)
FULL RANGE
10
cm (4˝) twin cone type (6
Ω)
Impedance
6
Input power (IEC)
20
W (Max)
Output sound pressure
83
dB/W (1.0 m)
Frequency range
51
Hz to 23
kHz (–16
dB)
83
Hz to 22
kHz (–10
dB)
Dimensions (W x H x D)
139
mm x 227
mm x 136
mm
(5
15
/
32
˝ x 8
15
/
16
˝ x 5
11
/
32
˝)
Mass
1.3
k
g
(2.9
lb.)
GENERAL
Power supply
AC 120
V, 60
Hz
Power consumption
57
W
Dimensions (W x H x D)
165
mm x 227
mm x 285
mm
(6
1
/
2
˝ x 8
15
/
16
˝ x 11
1
/
8
˝)
Mass
3.2
k
g
(7.1
lb.)
Operating temperature range
+5˚C to +35˚C (+41˚F to +95˚F)
Operating humidity range
5
% to 90
% RH (no condensation)
Power consumption in standby mode 0.6
W
Note
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
If the surfaces are dirty
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this
unit.
Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
For a cleaner, crisper sound
For a cleaner, crisper sound
Clean the heads regularly to assure good quality playback
and recording.
Use a cleaning tape (not included).
Maintenance