Panasonic SCPM53 SAPM53 User Guide - Page 12
SOUND ADJUSTMENT, Timer Continued - manual
View all Panasonic SCPM53 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Timer (Continued) Sound adjustment Other basic operations To Action change the settings Repeat steps 1 to 4 and 6 on page 11. change the source or volume 1) Press [˚PLAY/REC] to clear the timer indicator from the display. 2) Make changes to the source or volume. 3) Perform steps 5 and 6 on page 11. check the settings Press [CLOCK/TIMER] repeatedly to (when the unit is on select ˚PLAY or ˚REC. or in standby mode) cancel Press [˚PLAY/REC] to clear the timer indicators from the display. Note • The play timer and record timer cannot be used together. • The play timer will start at the preset time, with the volume increasing gradually to the preset level. • The record timer will start 30 seconds before the set time with the volume muted. • The timer comes on at the set time every day if the timer is on. • The unit must be in the standby mode for the timer to function. • If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. • If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, activate the equipmentʼs play mode and increase the volume. (See the portable audio equipmentʼs instruction manual.) Selecting sound effects You can change the sound effect by selecting Preset EQ or adjusting the bass or treble effect. Preset EQ Press [PRESET EQ] repeatedly to select your desired setting. HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF Setting HEAVY CLEAR SOFT VOCAL EQ-OFF Effect Adds punch to rock Clarifies higher frequencies For background music Adds gloss to vocal No effect Bass or treble Enable you to enjoy the lower or higher pitch sound. 1 Press [BASS] or [TREBLE] to select your desired setting. Setting BASS Effect For lower pitch sound TREBLE For higher pitch sound 2 Press [5] or [∞] to adjust the level. OR To adjust bass or treble using the main unit. Turn [BASS] or [TREBLE] clockwise to increase the level. Turn [BASS] or [TREBLE] counter-clockwise to decrease the level. Note The tone level can be varied within -3 to +3. RQTV0097 12