Panasonic SDR-SW20S Sd Movie Camera - Multi Language - Page 22
Setup, Charging
UPC - 037988256464
View all Panasonic SDR-SW20S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1 Setup Charging Insert the battery into the unit and charge it. 1 Set the mode dial to [OFF]. The unit runs on AC power (status indicator lit red) and the battery cannot be charged when the mode dial is set to any position other than [OFF]. 2 Open the card/battery door. Slide the lock to the OPEN side and lift the projection with a finger to open. OPEN Projection 3 Insert the battery. Ensure that battery is oriented correctly, and push it into the compartment in the direction of the [▲] until it snaps into place and it is locked by the lever. (To remove the battery, press the lever downward.) 4 Close the card/battery door. Press [ ] until hearing the door snap closed. 5 Connect the AC adaptor (supplied). Connect the AC cable to the AC adaptor and then to an AC outlet. Lever Press here. OPEN Check that the red marker of the lock is no longer visible. AC adaptor AC cableˎ To AC outlet Small gap here. ˎDo not use the AC cable and AC adaptor of this unit with other devices. Also, do not use the AC cables and AC adaptors of other devices with this unit. 22 VQT1M21