Panasonic SDRS10PPC Sd Video Camera - English/spanish - Page 107
volume during, playback is low.
View all Panasonic SDRS10PPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Others Problem Auto focus function does not work. Sound is not played back from the built-in speaker of this unit. During playback, the sound from the camera's motor is heard in the recording. The speaker volume during playback is low. Although this unit is correctly connected to a TV, playback images cannot be seen. The playback images are squeezed horizontally. Check points ≥ Is manual focus mode selected? # Set the unit to auto focus mode by pressing the AUTO button. ≥ Are you trying to record a scene which is hard to bring into focus in auto focus mode? # There are some recording subjects and surroundings for which the auto focus does not operate correctly. (l 115) If so, use the manual focus mode to adjust the focus. (l 59) ≥ Is the volume too low? # During playback, press the volume button to display the volume indication and adjust it. (l 66) ≥ This is a mechanical sound of the camera, but it is not a malfunction. ≥ Are there drops of water on the microphone? # The recorded mechanical sound may become louder and the microphone's sensitivity may decrease when there are drops of water on the microphone. Wipe off any drops of water and then leave the unit to dry naturally. ≥ Are there drops of water on the microphone? # The volume of the output sound may decrease when the speaker is wet. After wiping off any drops of water and then leaving the unit to dry naturally, it will return to normal. ≥ Have you selected video input on the TV? # Please read the operating instructions of your TV and select the channel that matches the input used for the connection. ≥ Is the [TV ASPECT] setting correct? # Change the setting to match the aspect ratio of the TV. Press the MENU button, then select [SETUP] # [TV ASPECT] # [16:9] or [4:3] and press the cursor button in the center. 107 VQT1D97