Panasonic SHFX67 SHFX67 User Guide - Page 8

Setup Setup Making the wireless link Refer also to the operating instructions for your home theater unit. 1 Turn on the wireless system. Unit on/off button [POWER C I, B Í] Use this button to turn the unit on and off. C I: The unit is on. B Í: The unit is off. POWER AUTO OPERATION ON/OFF AUTO OPERATION ON/OFF indicator The indicator lights red when the unit is turned on and lights green when the wireless link is activated. When the wireless link is inactive for a long time, it turns red. 2 Turn on your home theater unit and check the wireless link indicator on the home theater unit. e.g. Display on the home theater unit LP STCT DDTS PL SRDE. PRG PGM RND RDS EQ W1W2 WS " [W1] " or an indicator should light up. ≥ If " [W1] " or an indicator is flashing, refer to Troubleshooting guide (➜ page 10). 3 Start play on the home theater unit. Conserving power The wireless system consumes a small amount of power, even when it is off (approx. 0.2 W). To save power when the unit is not to be used for a 8 long time, unplug it from the household AC outlet. 8 ∫ Pairing with existing SH-FX85 (not included) Your wireless system can be used with SH-FX85, both operating on the same wireless system as SH-FX85. By pairing, you can enjoy the benefits of both systems working together simultaneously. Preparation ≥ Use the SH-FX85T transmitter card for pairing. Store your SH-FX67T transmitter card in a cool dry place for later use. ≥ Make sure that the speaker and AC cord connections are completed, and the surround selector is set to the "SURR" position (➜ page 7). ≥ Turn on the home theater unit and SH-FX85, and then reduce the volume. 1 Turn on SE-FX67. 2 While pressing the skip and slow-search button (e.g. [9/5]) on the home theater unit, press the numbered button [3] on the remote control until "P" lights in the home theater unit's display. ≥The indicator on SE-FX67 turns green. 3 While "P" is displayed, press on the rear of SE-FX67. [I/D SET] ≥If "P" goes off before you press [I/D SET], repeat step 2 and then Use a pointed object. continue the procedure. 4 While pressing [9/5] on the home theater unit, press the numbered button [3] on the remote control. ≥" [W1] " or the wireless link indicator lights on the home theater unit. 5 Turn off and on SE-FX67. ≥Make sure the indicator on SE-FX67 lights up green. [Note[ Repeat the above steps if you should use SH-FX67T transmitter card (the link with SH-FX85 will be disconnected). ENGLISH RQTX0125