Panasonic SL-1200GAE Owners Manual - Page 15

English, Installation, Fit the dust cover

Page 15 highlights

Getting started Installation Install the unit on a horizontal surface protected from vibrations. Keep this unit as far as possible from speakers. „„Adjusting the height to make the unit horizontal Raise the main unit to turn the insulators and adjust the height. zzClockwise: Reduces the height. zzAnti-clockwise: Increases the height. Attention zzDo not turn the insulators too far. Doing so may cause them to come off or damage them. Fit the dust cover 1 Hold the dust cover with both hands and insert it into the dust cover fitting parts ( 10) on the player. zzTo remove the dust cover, keep it open and lift it straight above. „„Notes for installation zzBefore you move the unit, remove all devices connected and turn off the power supply. zzEnsure the unit is not exposed to direct sunlight, dust, humidity, and heat from a heating appliance. zzThis unit may pick up interference from a radio if there is one nearby. Keep the unit as far as possible from a radio. zzDo not install the unit on a heat source. zzAvoid a place with large temperature variations. zzAvoid a place with frequent condensation. zzAvoid an unstable place. zzDo not put an object on the unit. zzDo not install the unit in a confined space such as a book shelf. zzInstall the unit at a position well away from walls or other devices to ensure effective heat radiation from the inside of the unit. zzMake sure that the material of the installation location is sufficiently strong to withstand the weight of this unit. zzNote that the unit may be damaged by cigarette smoke or moisture from an ultrasonic humidifier. „„Condensation Think of taking out a cold bottle from a refrigerator. If you leave it in a room for a while, dewdrops will form on the bottle surface. This phenomenon is called "condensation". zzConditions causing condensation  Rapid temperature change (caused by moving from a warm place to a cold place or vice versa, rapid cooling or heating, or direct exposure to cooled air)  High humidity in a room with much steam, etc.  Rainy season zzCondensation may damage the unit. If it has occurred, turn the unit off and leave it until it adapts to the ambient temperature (approximately 2 to 3 hours). Attention zzReturn the tone arm to the arm rest and fix it with the arm clamp before you attach or detach the dust cover. 15 (15) English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Getting started
English
(15)
15
Installation
Install the unit on a horizontal surface
protected from vibrations.
Keep this unit as far as possible from speakers.
±
Adjusting the height to make the
unit horizontal
Raise the main unit to turn the insulators and
adjust the height.
z
Clockwise
: Reduces the height.
z
Anti-clockwise
: Increases the height.
Attention
z
Do not turn the insulators too far.
Doing so may cause them to come off or
damage them.
±
Notes for installation
z
Before you move the unit, remove all devices
connected and turn off the power supply.
z
Ensure the unit is not exposed to direct
sunlight, dust, humidity, and heat from a
heating appliance.
z
This unit may pick up interference from a
radio if there is one nearby.
Keep the unit as far as possible from a radio.
z
Do not install the unit on a heat source.
z
Avoid a place with large temperature variations.
z
Avoid a place with frequent condensation.
z
Avoid an unstable place.
z
Do not put an object on the unit.
z
Do not install the unit in a confined space
such as a book shelf.
z
Install the unit at a position well away from
walls or other devices to ensure effective
heat radiation from the inside of the unit.
z
Make sure that the material of the
installation location is sufficiently strong to
withstand the weight of this unit.
z
Note that the unit may be damaged by
cigarette smoke or moisture from an
ultrasonic humidifier.
±
Condensation
Think of taking out a cold bottle from a
refrigerator. If you leave it in a room for a while,
dewdrops will form on the bottle surface. This
phenomenon is called “condensation“.
z
Conditions causing condensation
Rapid temperature change (caused by
moving from a warm place to a cold place or
vice versa, rapid cooling or heating, or direct
exposure to cooled air)
High humidity in a room with much steam,
etc.
Rainy season
z
Condensation may damage the unit. If it
has occurred, turn the unit off and leave it
until it adapts to the ambient temperature
(approximately 2 to 3 hours).
Fit the dust cover
1
Hold the dust cover with both
hands and insert it into the dust
cover fitting parts (
10) on the
player.
z
To remove the dust cover, keep it open
and lift it straight above.
Attention
z
Return the tone arm to the arm rest and fix
it with the arm clamp before you attach or
detach the dust cover.