Panasonic SL-1200M7L Owners Manual - Page 17

English, Armlift height, Operation settings, rpm setting

Get Panasonic SL-1200M7L PDF manuals and user guides View all Panasonic SL-1200M7L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Armlift height Make an adjustment according to your cartridge if necessary. Preparation  Put a record on the turntable.  Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp.  Lift the cue lever and move the tone arm over the record. 1 Check the armlift height (distance between the stylus tip and record surface). If adjustment is needed, go to step 2 .  The armlift height is factory-adjusted to 8 to 13 mm (5/16 to 33/64 "). 8 to 13 mm (5/16 to 33/64 ") 2 Return the tone arm to the arm rest, clamp it with the arm clamp and while pressing the armlift down with your finger, turn the screw to adjust the height.  Turning the screw clockwise lowers the armlift.  Turning the screw anti-clockwise raises the armlift. Armlift   Armlift screw Arm clamp Getting started BK2 BK1 TQ2 TQ1 78 REV LED ON Operation settings Allows for LED color setting, reverse playback setting, 78 rpm setting, torque setting and brake setting. ᶃTurn the unit off and pull out the power plug. ᶄAdjust as desired by setting the switches with a fine Phillips head screwdriver and the like. ON OFF Switch no. ON 12345678 LED color setting Allows you to select red or blue for the color of the strobe light, speed select buttons, pitch range select button and RESET LED lamp. Red Blue Switch no.: 1 (LED) OFF (Factory setting) ON Reverse playback setting Allows you to disable or enable reverse playback. ( 19) REV disabled REV enabled Switch no.: 3 (REV) OFF (Factory setting) ON 78 rpm setting Allows you to disable or enable 78 rpm. ( 19) 78 rpm disabled 78 rpm enabled Switch no.: 4 (78) OFF (Factory setting) ON Torque setting Allows you to select from four levels of strength to adjust the torque. Switch no.: 5 (TQ1) Switch no.: 6 (TQ2) High ᶃ ON ON ˱ ᶄ OFF ON ᶅ OFF (Factory setting) OFF (Factory setting) Low ᶆ ON OFF Brake setting Allows you to select from four levels of brake strength to stop the turntable after [START-STOP] is pressed. Switch no.: 7 (BK1) Switch no.: 8 (BK2) High ᶃ OFF ON ᶄ OFF (Factory setting) OFF (Factory setting) ˱ ᶅ ON OFF Low ᶆ ON ON 17 (17) English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Getting started
17
English
(17)
Armlift height
Make an adjustment according to your
cartridge if necessary.
Preparation
Put a record on the turntable.
Remove the stylus cover, taking care not
to damage the stylus, then release the arm
clamp.
Lift the cue lever and move the tone arm over
the record.
8
to
13 mm
(
5
/
16
to
33
/
64
“
)
1
Check the armlift height (distance
between the stylus tip and record
surface).
If adjustment is needed, go to
step
2
.
The armlift height is factory-adjusted to
8 to 13 mm
(
5
/
16
to
33
/
64
“
)
.
Operation settings
Allows for LED color setting, reverse playback
setting, 78 rpm setting, torque setting and brake
setting.
①
Turn the unit off and pull out the power plug.
②
Adjust as desired by setting the switches with
a fine Phillips head screwdriver and the like.
ON
OFF
ON
ON
LED
REV
78
TQ1
TQ2
BK1
BK2
1
2
3
4
5
6
7
8
Allows you to select red or blue for the color of the
strobe light, speed select buttons, pitch range select
button and RESET LED lamp.
Switch no.: 1 (LED)
Red
OFF (Factory setting)
Blue
ON
LED color setting
Allows you to disable or enable reverse playback. (
19)
Switch no.: 3 (REV)
REV disabled
OFF (Factory setting)
REV enabled
ON
Reverse playback setting
Switch no.: 4 (78)
78 rpm disabled
OFF (Factory setting)
78 rpm enabled
ON
Allows you to disable or enable 78 rpm. (
19)
78 rpm setting
Allows you to select from four levels of strength to
adjust the torque.
Switch no.: 5 (TQ1)
Switch no.: 6 (TQ2)
High
①
ON
ON
⇔
②
OFF
ON
③
OFF (Factory setting)
OFF (Factory setting)
Low
④
ON
OFF
Torque setting
Switch no.: 7 (BK1)
Switch no.: 8 (BK2)
High
①
OFF
ON
⇔
②
OFF (Factory setting)
OFF (Factory setting)
③
ON
OFF
Low
④
ON
ON
Allows you to select from four levels of brake strength
to stop the turntable after [START-STOP] is pressed.
Brake setting
Switch no.
2
Return the tone arm to the arm
rest, clamp it with the arm clamp
and while pressing the armlift
down with your finger, turn the
screw to adjust the height.
Turning the screw clockwise lowers the
armlift.
Turning the screw anti-clockwise raises
the armlift.
1
2
Armlift screw
Armlift
Arm clamp