Panasonic SR-ZS185 Operating Instructions - Page 17

When the display shows as follows

Page 17 highlights

How to use adjustable steam basket / When the display shows as follows How to use adjustable steam basket ■ Height adjustment Put your thumb on the ring on the inner wall of the rotating part, lift and slightly turn it counterclockwise, and then release your finger. The height of the adjustable steam basket will increase. To restore the previous size, hold the bottom of the rotating part with your palm, slightly turn it clockwise, and lift it up to clip. Fixed part Rotating part ■ Disassembly Firstly, restore the adjustable steam basket to the initial state (shallow), turn it over on the table, and then press down firmly on the rotating part up to clip. Fixed part and rotating part will separate. ■ Assembly Direct the protrusion on the edge of the rotating part towards the groove on the inner wall of the fixed part, and then press with force on the bottom of the rotating part up to clip. When the display shows as follows Display U14 H01 H02 H05 Problems and troubleshooting Following continuous 96 hours Keep Warm function, the power supply will automatically cut off. Please press button first. Contact the authorized service center for repair. 06_USA_OI_SR-ZS185_EN.indd 17 17 9/2/2558 BE 20:41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

How to use adjustable steam basket
How to use adjustable steam basket /
When the display shows as follows
Fixed part
Rotating part
17
Height adjustment
Put your thumb on the ring on the inner wall of the rotating part, lift and slightly turn it counterclockwise, and
then release your
nger. The height of the adjustable steam basket will increase. To restore the previous size,
hold the bottom of the rotating part with your palm, slightly turn it clockwise, and lift it up to clip.
Disassembly
Firstly, restore the
adjustable steam basket
to the initial state (shallow), turn it over on the table, and then press
down
rmly on the rotating part up to
clip
. Fixed part and rotating part will separate.
Assembly
Direct the protrusion on the edge of the rotating part towards the groove on the inner wall of the
xed part, and
then press with force on the bottom of the rotating part up to
clip
.
Display
Problems and troubleshooting
U14
Following continuous 96 hours
Keep Warm
function, the power supply will automatically cut off.
Please press
button
rst.
H01
H02
Contact the authorized service center for repair.
H05
When the display shows as follows
06_USA_OI_SR-ZS185_EN.indd 17
06_USA_OI_SR-ZS185_EN.indd
17
9/2/2558 BE 20:41
9/2/2558 BE
20:41