Panasonic TC-L32X1 26" Lcd Tv - Page 31

How to Use Menu Functions (picture, sound quality, etc.) (Continued) Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only) • Favorite: Only channels registered as FAVORITE (p. 18) Selects the screen menu language (p. 15) Channel surf mode All Language Adjusts the clock (p. 15) Clock Sets channels (p. 41) ANT/Cable setup Selects the terminal and label of the external equipment (p. 43) Controls equipment connected to HDMI terminals (p. 34) (On/Off) • "Power off link", "Power on link", and "Default speakers" cannot be selected if "Off" is set. Sets "Power on link" of HDMI connection equipment (p. 34) (Yes/No) Input labels VIERA Link On Power on link Yes Sets "Power off link" of HDMI connection equipment (p. 34) (Yes/No) Power off link Yes Set "Stand-by power save" of HDMI connection equipment. (p. 34) (No/Yes) Stand-by power save No Set "Auto power stand-by" of HDMI connection equipment. (p. 34) (No/Yes (with reminder)/Yes (no reminder) Auto power stand-by No Selects the default speakers (p. 34) (TV/Theater) Default speakers TV Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room. (Standard/Saving) To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed for more than 10 minutes. (Enable/Disable) Note Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD mode" or Digital channel. •• "No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV is turned • on for the first time after turning the power off by "No signal for 10 minutes". The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, the TV automatically turns off when no operation of remote or side panel key continues for more than 3 hours. (Enable/Disable) Note Not in use when setting "Auto power on", "On/Off Timer or PC input display. •• "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV is turned on • for the first time after turning the power off by "No activity for 3 hours". The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. Turns TV On automatically when the cable box or a connected device is turned On. (No/Yes) TV power cord must be plugged into this device. TV comes on every time the power is restored. • The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 44) Power save Standard No signal for 10 minutes Enable No activity for 3 hours Disable Auto power on No Set "Thumbnail" or "Slideshow" to play back SD cards automatically. (Slideshow/Thumbnail/Set later/Off) Play SD card automatically Set later Displays TV version and software license. About Performing Reset will clear all items set with Setup, such as channel settings. (p. 40) Reset to defaults Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital only/Analog only) Sets favorite channels. (p. 18) Changes the station identifier. (p. 41) Checks the signal strength if interference or freezing occurs on a digital image. (p. 41) Advanced 31