Panasonic TC17LA1 TC14LA1 User Guide - Page 8

Connections Connecting the Antenna Cable to the Antenna Terminal Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV. VHF Antenna UHF Antenna ANT Mixer 75 Ohm Coaxial Cable Antenna Terminal ANT (ANT or VHF/UHF) Coaxial Antenna Plug Antenna cover removal and fitting TC-14LA1/ TC-17LA1 TC-20LA1 Removal 1 2 1.Grasp the cover at the Removal bottom end and initially remove by pulling slightly toward yourself. 2.Slowly pull out in the 1 2 downward direction. Fitting 1 2 1.Insert the claws (at 4 Fitting points) at the top end. 2.Push the claws in (at 4 1 points) at the bottom end. 2 1.Grasp the opening and initially pull the cover slightly towards yourself to disengage the claws (at 2 points on both the left and right). 2.Slowly pull out in the downward direction. 1.Insert the claws (at 4 points) at the top end. 2.Push the claws in (at 4 points) at the bottom end. Note: To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together. Antenna / Cable Connection Incoming 75 Ohm Cable from Home Antenna / Cable Company F-Type Antenna Adapter (not supplied) ANT (VHF/UHF) on the Back of the TV Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company. Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.) Note: Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local Cable company for its compatibility requirements. 8