Panasonic TC20LE50 TC20LE50 User Guide - Page 12

Basic Controls Main POWER switch TV/VIDEO VOL CH Press to turn the TV's main power on/off. POWER (see page 9) TV/VIDEO button Volume Up/Down Channel Up/Down POWER button Press to turn the TV on or off. (see page 9) Note: This does not work when the main power is off (No light). MUTE button Press to mute the sound. Press again to cancel mute. Mute is canceled when the power is turned off or volume level is changed. Remote control sensor Within about 23 feet (7 meters) in front of the TV set. TV/VIDEO button Press to change the input mode. TV VIDEO1 VIDEO2 COMPONENT SAP button Press to select the audio mode. You can also change the mode in the MENU screen (see page 21). STEREO SAP MONO MENU button (see page 10) ASPECT button (see page 22) SLEEP button Set the sleep time to turn the TV into standby mode. 30 60 90 0 • When 3 minutes left, " 3 " will flash. ("2" for 2 minutes and "1" for 1 minute). • The SLEEP timer is cancelled when the power is turned off. RETURN button Press to return to the previous screen. Numbered buttons R-TUNE button Press to switch to previously viewed channel or video mode. Not effective under the following conditions: 1. Right after the TV is turned on. 2. After switching TV / CATV (MODE in PROGRAM CHANNELS). 3. Right after the ACP (Automatic channel programming) execution. 4. When the same channel as the present channel is selected. Channel up Moves cursor upward during menu mode. Reduces volume Moves cursor to the left during menu mode. Increases volume Moves cursor to the right during menu mode. Channel down Moves cursor downward during menu mode. RECALL button Press to display channel number, sleep timer and other options. 12