Panasonic TCP65VT30 TCP55VT30 User Guide - Page 27
Change the view 3D, 3D settings Adjust 3D images, Display 3D format select Manual - dimensional
UPC - 885170043428
View all Panasonic TCP65VT30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Change the view 3D⇔2D ■Simply switches 3D ⇔ 2D images (Auto mode) 3D format select 3D 2D (example) select OK ● VIERA TOOLS -->p. 22 "3D" icon also available. ● Switches to Manual mode (see below) ■Change 3D format (Manual mode) During above operation press red button and switch to Manual mode. Display "3D format select (Manual) Press 3D to cycle through the 3D format 3D format select (Manual) Native Frame sequential (3D) Frame sequential (2D) Side by side (3D) Side by side (2D) Top and bottom (3D) Top and bottom (2D) 2D -> 3D 3D format select (Manual) Native Frame sequential (3D) Frame sequential (2D) Side by side (3D) Side by side (2D) Basic 2D -> 3D (example) Viewing 3D images on TV 3D settings (Adjust 3D images) Select "3D settings" in "Setup" • How to Use Menu Functions (p. 50) • Using "Setup" menu (p. 55) Select the item and set 3D settings Auto detect 3D 3D signal notification 2D -> 3D depth 3D adjustment Left / Right swap Diagonal line filter Safety precautions Auto 1 On Medium Normal Off select next ■3D adjustment Changes 3D depth by adjusting left-right parallax. Set "On" and adjusts "Effect" 3D adjustment 3D adjustment Effect On +1 select adjust 3D adjustment (On/Off) Effect (-3 to +3) Settings Item Description Auto detect 3D Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D), AVCHD file,etc) Auto 2: Same as Auto 1. plus detects 3D signal by identifying similar image in side by side or top-and-bottom 3D formats. Note: choose 3D mode manually, when auto detection is not available. (Off/Auto 1/Auto 2) 3D signal notification On: Displays a message according to the signal received by the "Auto detect 3D". (On/Off) 2D->3D depth Adjusts 3D depth. Available only when "2D->3D" is selected in "3D format select". (Minimum/Medium/Maximum) 3D adjustment Left / Right swap Diagonal line filter Safety precautions See above. (3D adjustment (On/Off), Effect (-3 to +3)) Change this to On when the phases are reversed. (when there is an unusual sense of depth). (Normal/Swapped) On: Resolves discomfort caused by receiving a quincunx matrix signal. (On/Off) Displays message for viewing 3D images. * The perceived three dimensional effects of the 3D Eyewear differ from person-to-person. * If a signal received from an external device is different from the 3D setting of the TV, such as 2D signal when the TV is set to 3D mode, the images may not be displayed correctly. 27