Panasonic TH-65LFE8U Professional Display for Simple Entry-Level Digital Signage - Page 48
Setting RGB/PC sync signal
View all Panasonic TH-65LFE8U Professional Display for Simple Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
[Component/RGB-in select] This menu is displayed when the PC signal input. Select to match the signals from the source connected to the PC IN terminal. [Component] Y, PB, PR/Y, CB, CR signals [RGB] RGB signals [YUV/RGB-in select] This menu is displayed when the HDMI and PC signal inputs. Select to match the signals from the source connected to the HDMI 1, HDMI 2 and DVI-D IN terminals. [YUV] [RGB] YUV signals RGB signals [Sync] This function operates only during PC IN input. Setting RGB/PC sync signal [Auto]: The H and V sync or synchronized signal is automatically selected. When both of them have sync, H and V sync will be selected. [on G]: Uses a synchronized signal on the Video G signal, which is input from the G connector. [HV sync]: Uses a synchronized signal on the Video HD/VD signal, which is input from the HD/VD connector. Setting Component sync signal [Auto]: The H and V sync or synchronized signal is automatically selected. When both of them have sync, H and V sync will be selected. [on Y]: Uses a synchronized signal on the Video Y signal, which is input from the Y connector. [HV sync]: Uses a synchronized signal on the Video HD/VD signal, which is input from the HD/VD connector. [Cinema reality] Faithfully reproduces videos shot with cinema films. Set this to [Off] normally. Note Ɣ In [ENGLISH(US)] OSD language, [Cinema reality] is displayed as [3:2 PULLDOWN]. Ɣ If [Cinema reality] is set to [On], videos including movies shot at 24 frames per second are reproduced more naturally. Ɣ If the video is unnatural with [On] set, set it to [Off]. [Noise reduction] Reduces picture noise. [Off]: Disables Noise Reduction. [Min], [Mid], [Max]: Sets strength of Noise Reduction. [Auto]: Noise reduction will be automatically selected from [Min], [Mid] or [Max]. Note Ɣ This menu is not displayed during PC IN input. [MPEG noise reduction] Reduces block noise and mosquito noise on MPEG videos. [Off]: Disables Noise Reduction. [Min], [Mid], [Max]: Sets strength of Noise Reduction. Note Ɣ This menu is not displayed during PC IN input. [XGA mode] This menu is displayed during PC IN input. This unit supports XGA signals (1024 × 768, 1280 × 768, 1366 × 768) having different aspect ratios and sampling rates. [Auto]: Automatically detects the signal. Switch the setting to suit the input signal for better display depending on the angle of view or display resolution condition. Note Ɣ After making this setting, be sure to make each adjustment (such as [Auto setup]) on the [Position] menu as necessary. (see page 38) 48 English