Panasonic TH-98SQ1 Spec File - Page 4

98-inch Class 4K UHD LCD Display TH-98SQ1W Correspondence signal 1400 x 1050/60 1400 x 1050/75 1440 x 900/60 1440 x 900/60 1600 x 900/50 1600 x 900/60 1600 x 900/60 1600 x 900/60 1600 x 1200/60 1680 x 1050/60 1920 x 1080/60 1920 x 1080/60 1920 x 1200/60 1920 x 2160/60 1920 x 2160/60 2560 x 1440/60 2560 x 1600/50 2560 x 1600/60 3840 x 1080/60 3840 x 2160/60 3840 x 2160/30 Scan rate Resolution (dot) Horizontal (kHz) Vertical (Hz) Dot clock rate (MHz) Format*2 1 1400 x 1050 65.22 60.00 122.61 D/H/DL/DP - 1400 x 1050 82.20 75.00 155.85 R/D/H/DL/DP - 1440 x 900 55.47 59.90 88.75 R/D/H/DL/DP - 1440 x 900 55.92 60.00 106.47 R/D/H/DL/DP - 1600 x 900 46.30 50.00 97.05 R/D/H/DL/DP - 1600 x 900 60.00 60.00 108.00 D/H/DL/DP - 1600 x 900 55.99 59.95 118.25 D/H/DL/DP - 1600 x 900 55.92 60.00 119.00 D/H/DL/DP - 1600 x 1200 75.00 60.00 162.00 R/D/H/DL/DP - 1680 x 1050 65.29 59.95 146.25 R/D/H/DL/DP - 1920 x 1080*3 66.59 59.93 138.50 R/D/H/DL/DP - 1920 x 1080 67.50 60.00 148.50 R/D/H/DL/DP ○ 1920 x 1200 74.04 59.95 154.00 R/D/H/DL/DP ○ 1920 x 2160 133.29 59.99 277.25 H/DL/DP - 1920 x 2160 135.00 60.00 297.00 H/DL/DP - 2560 x 1440 88.79 59.95 241.50 H/DL/DP - 2560 x 1600 82.37 49.95 286.00 H/DL/DP - 2560 x 1600 98.71 59.97 268.50 H/DL/DP - 3840 x 1080 66.63 59.97 266.50 H/DL/DP - 3840 x 2160 133.31 60.00 533.25 H/DL/DP - 3840 x 2160 65.69 29.98 262.75 H/DL/DP - Plug and play compatible signal*5 HDMI 2 3 4 DL DP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ○ - - - - - - - - - - - - - - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - - - - - - - - ○ - ○ ○ - - - - - - - - - - - - - - - - - - - ○ - - - - ○ DVI-D/ PC *1：Pixel-Repetition signal (dot clock frequency 27.0 MHz) only *2：Signals to represent formats are as follows. R ：D-sub RGB (PC IN) Y ：YPBPR/YCBCR (PC IN) D ：DVI-D (DVI-D IN) H ：HDMI (HDMI 1, HDMI 2) DL：DIGITAL LINK (DIGITAL LINK) DP：Display Port (Display Port) The analogue input supports onG and onY. *3：Based on VESA CVT-RB (Reduced Blanking) standard *4：YCBCR420 format only supported *5：Signals with ○ in the Plug and Play-supported signal column are the ones written in EDID (Extended Display Identification Data) of this unit. For signals without ○ in the Plug and Play-supported signal column, resolutions may not be selected on the PC side even if this unit supports those signals. Note ● An auto detected signal format may be differently displayed from the actual input signal. ● [ i ] shown after the number of dots of resolution means the interlace signal. ● When 1080/30PsF signal and 1080/25PsF signal are input, they are processed as 1080/60i signal and 1080/50i signal, and then displayed. ● When 1920 x 2160/60 signal (dot clock frequency 297.00 MHz, DIGITAL LINK format) is input, 3840 x 2160/60p is displayed. © Panasonic Corporation 2018 4/5 98SQ1W_PHK_01_03/12/2018