Panasonic TH32LR11UH TH32LR11UH User Guide - Page 31
Pulldown, Color System / Panasonic Auto, Xga Mode
View all Panasonic TH32LR11UH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
SET UP for Input Signals COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the "SET UP" menu during VIDEO (S VIDEO) input signal mode.("SIGNAL [VIDEO]" menu is displayed.) Press to select the "COLOR SYSTEM" or "Panasonic AUTO". SIGNAL [ VIDEO ] Press to select each function. 3D Y/C FILTER (NTSC) COLOR SYSTEM ON AUTO If the image becomes unstable: With the system set on Auto, under conditions of low level or 3 : 2 PULLDOWN OFF Panasonic AUTO (4 : 3) 4:3 noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal. Mode Function COLOR SYSTEM Set the color system to match the input signal. When selecting "AUTO", the color system is automatically selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on the attached terminal board. To display M.NTSC signal, select "M.NTSC" in COLOR SYSTEM. AUTO PAL SECAM M.NTSC NTSC Panasonic AUTO Set to "4:3" to view 4:3 images in an unchanged format when Panasonic AUTO is selected. (4 : 3 ) If you would like to view 4:3 images in Just format, set to "JUST". Note: Panasonic AUTO does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used. 3:2 PULLDOWN 3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to OFF. Notes: When ON, this setting only affects the following signal input: • NTSC / PAL signal input during "VIDEO (S VIDEO)" input signal. • 525i(480i), 625i(575i), 1125(1080)/60i signal input during "COMPONENT" input signal. Press to select "3:2 PULLDOWN". 3 : 2 PULLDOWN OFF Press to set ON/OFF. XGA MODE This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz, and 1,366 × 768 @ 60Hz). Be sure to make settings in accordance with the input signal in order to achieve a more appropriate and attractive display. In addition, after making this setting, be sure to make each adjustment (such as "AUTO SETUP") on the "POS. /SIZE" menu as necessary. (see page 21) Press to select "XGA MODE". Press to select "1024×768", "1280×768" , "1366×768". XGA MODE 1024 × 768 31