Panasonic TH42PHD8GK TH37PHD8GK User Guide - Page 21

Advanced PIP 1 Press to display the Setup menu. 2 Press to select "OSD Language". 3 Press and hold until the Options menu is displayed. 4 Press to select Advanced PIP. Options 1/2 Off-timer function Enable Onscreen display On 5 Press to adjust the menu. Off : Sets normal two screen display mode Initial INPUT Initial VOL level Off Off 0 (see page 20). On : Sets Advanced PIP mode. Maximum VOL level INPUT lock Studio W/B Off 0 Off Off Advanced PIP Off Press to confirm. Display size Off One screen Advanced PIP 6 Press to exit from Options menu. Sub screen Main screen Notes: • Advanced PIP corresponding signal Sub screen NTSC, PAL, SECAM (tuner, video) 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1250/50i (Component Video, RGB, DVI, SDI, HDMI) Main screen 640x480@60Hz, 852x480@60Hz, 1024x768@60Hz, 1366x768@60Hz (RGB, DVI, HDMI) 1280x768@60Hz (DVI) • Sound output is from the picture which is selected in Audio OUT (PIP) (See page 24). • In 2 screen display, the same input mode cannot be selected for the main picture and sub picture. • The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode. • Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail. • Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily. • Following combinations of two analog signals cannot be displayed simultaneously TH-37PWD8GK/S, TH-42PWD8GK/S, TH-37PHD8GK/S, TH-42PHD8GK/S; Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB) • Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals. 21