Panasonic UB-7325 Panaboard - Page 25

Operating Instructions 2 Clean the Printer Head Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head. Daily Care and Maintenance 4 Install the thermal transfer film in its original position and close the printer door. Latches Cotton swab Printer head (Gold) Note • Never touch the printer head or the surrounding area with your hands as this may disable copying. 3 Clean the Platen Roller and the Pick-up Roller Remove the thermal transfer film with both hands and carefully wipe any dirt or stains off the platen roller and pick-up roller. Pick-up roller Platen roller • For details on installing the thermal transfer film, see pages 10. • Close the printer door firmly until a click is heard. Note • If " " is still flashing after closing the printer door, make sure that the thermal transfer film has been installed properly and tightened. • The printer door should be closed to make copies properly. Confirm both latches are locked. • For details on removing the thermal transfer film, see page 14. • Dampen a soft cloth with neutral kitchen cleaner diluted in water, wring the cloth thoroughly, and wipe the entire surface of the rollers while rotating them. If this does not remove all dirt, wipe with a cloth dampened with ethyl alcohol. 25