Panasonic VDR-D210 Dvd Camcorder - English/spanish - Page 33
INSERTING/REMOVING A DISC, Open the LCD monitor or extend
UPC - 037988980284
View all Panasonic VDR-D210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Setup When the power is turned on for the first time after changing the disc or battery, the unit carries out a recognition procedure to check that there are no problems with the disc. This takes approximately 25 seconds with DVD-RAM. If you want to start using the unit as soon as you turn on the power, do the following. 1) Turn on the power. 2) After "READING DISC..." disappears from the screen, turn off the power. You can start recording approximately 8 seconds after you turn on the power again. ≥ Depending on the condition of the disc, it may take longer than this. ≥ If the date and time are not set, it will take longer than usual before you can start recording. How to turn the power on and off with the LCD monitor/viewfinder When the OFF/ON switch is set to ON, the power can be turned on and off with the LCD monitor and the viewfinder when the unit is in video recording mode or picture recording mode. ∫ To turn on the power Open the LCD monitor or extend the viewfinder. ∫ To turn off the power Close the LCD monitor and retract the viewfinder. The status indicator goes off and the power turns off. ≥ The power will not turn off unless the LCD monitor is closed and the viewfinder is retracted. ≥ The power will not turn off while recording on a disc even if the LCD monitor is closed and the viewfinder is retracted. Set the OFF/ON switch to OFF when the unit is not being used. Inserting/removing a disc When inserting or removing the disc, fit the charged battery pack or connect the AC adaptor to the unit. The cover of the disc compartment will not open unless the unit is powered. 1 Fit the battery or connect the AC adaptor. 2 Slide the DISC EJECT lever once and release it. The status indicator lights and the power turns on. 33 LSQT1145