Panasonic VL-GC002A-W Door Station White - Page 8
Installing The Door Station
UPC - 037988851539
View all Panasonic VL-GC002A-W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Introduction and Installation Installing the door station 1 Loosen the mounting screw, and then remove the mounting base. Screwdriver 2 Install the mounting base to a wall using the attached wood screws. (4 mm x 20 mm, 3/16″ x 13/16″). Mounting base Wall Wood Screws Note: • Install so that picture range will be within a height of 995 mm ~ 1795 mm from the ground surface. Important information: On the bottom surface of the door station, there are holes to allow water to drain. Do not cover it up when installing. 8
8
Introduction and Installation
Installing the door station
1
Loosen the mounting screw, and then remove the mounting base.
Screwdriver
2
Install the mounting base to a wall using the attached wood screws.
(4 mm x 20 mm,
3
/
16
″
x
13
/
16
″
).
Wall
Mounting base
Wood
Screws
<Installation size>
Important information:
On the bottom surface of the door station, there are holes to allow water to drain.
Do not cover it up when installing.
Note:
•
Install so that picture range will be within a height of
995 mm ~ 1795 mm from the ground surface.