Panasonic WJ-HD616/1000 Operating Instructions - Page 114
Operate the camera, Panning/Tilting, the clicked direction.
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Operate the camera It is possible to operate the following camera operations when displaying live images from a combination cam- era. Panning/Tilting: Adjust the horizontal/vertical position of images from the camera. Zoom: Zoom in/out images from the camera Focus: Adjust the focus of the camera. Iris: Adjust the lens iris of the camera Preset position function: Register preset positions and move the camera direction to the registered preset position. Auto function: Activate the auto function of the camera according to the settings of the camera Note: • The camera operation can be performed only when displaying images on a 1-screen on monitor 1. • Depending on the model of the camera, some operations may not work. • When a user with a higher user priority is operating at the same time, it may be impossible to operate the camera. Refer to the Installation Guide for further information about the priority. • Refer to page 118 for how to display the setup page of the camera and configure the settings of the camera. Panning/Tilting Adjust the horizontal/vertical position of images from the camera. Step 1 Display the top page of the operation window. (☞ Page 77) Step 2 Display live images from the camera on a 1-screen, and then click the [CAM] tab. Step 3 Adjust the horizontal position and the vertical position of the camera (direction) by any of the following. Control buttons: Click to move (pan/tilt) a camera in the clicked direction. Control pad: Click to move (pan/tilt) a camera in the clicked direction. Panning/tilting speed will become faster if a clicked point gets farther from the center point of the control pad. Image display area: Click the desired point to be located at the center of the angular field of view. The camera will move to locate the clicked point as the center point in the image display area. → The [CAM] tab will be displayed. 114