Panasonic WJ-ND300A/10000V Spec Sheet - Page 1

Network Disk Recorder WJ-ND300A WJ-ND300A (120 V AC) WJ-ND300A (220 ~ 240 V AC) Network Disk Recorder with expandable capacity for digital image data from up to 32 Network Cameras Key Features • H.264, MPEG-4 and JPEG multi format • Up to 32 network cameras can be connected and recorded. • Various Recording Modes: Manual, Schedule, Event (Pre/Post), Emergency, External Timer • Various alarm sources include 16x Terminal inputs, 16x Camera alarms, Panasonic Alarm Protocol. Flexible alarm actions include Alarm recording, E-mail notification, Alarm message, Camera positioning, FTP image transfer, Terminal output, Panasonic alarm protocol output, Buzzer and Indicator. • Panasonic Camera Control: Pan/Tilt, Zoom, Focus, Brightness, Preset Position, Auto mode (depending on camera model). • Cameras may be assigned to one of the 8 groups to meet application requirements. • Flexible Playback Controls: A-B Repeat, Goto Date (Jump to specific time/date), Goto Last (Jump to 5 sec. ~ 5 min. before the record end). • Various Display Modes: Spot, Quad (8 patterns), Spot Sequence, Quad Sequence. • 8 Quad screens are fully programmable. Any of the 32 cameras can be assigned to any area of the Quad screens. • Filtered Search: Time & Date, Event Type, Camera number, Text • Recorded images can be downloaded to a PC. • Downloadable viewer software allows playback of images downloaded from the Recorder. • 2 setup modes available, Quick/Advanced at users' preference. • 2 built-in network interfaces (10Base-T/100Base-TX) for camera access and client access. Operation by one port is also possible. • Quick IP Setup for Panasonic i-Pro series network cameras • Bandwidth control: 32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited • Up to 8 clients can monitor images and control WJ-ND300A simultaneously. • Image transfer to FTP server: Recorded image upon alarm and/or live image periodically • Performance measurement function for appropriate recording frame rate setup • Images recorded on the SD memory card in the i-Pro series cameras can be downloaded to the recorder manually. In addition, recordings upon network failure can be transferred automatically when the recorder is in non-recording status. • Alarm notification by e-mail. • User/Host authentication, 4 user levels and User-Camera View/Control partitioning set up for sophisticated user management of up to 32 user registrations. • Multi-recorder, Multi-site system can be made with optional WVASM100 i-Pro Management Software. • Front panel LCD screen for status display • HDD capacity is expandable with 4 HDD slots in the main unit and up to 6 WJ-HDE300 optional Extension Units each with 4 HDD slots. • Disk partitioning for flexible record management: Normal, Event, Copy • HDD Safety Mode to protect HDDs during the installation of WJ-ND300A • RAID5 capability with optional WJ-NDB301 RAID5 Board Standard Accessories • CD-ROM 1 pc. • Installation Guide 1 pc. The followings are for installation: • Power Cord (NTSC model 1 pc. • Power Cord (PAL model 2 pcs. • Rack Mount Bracket 2 pcs. • Rack Mount Bracket Fixing Screw ... 4 pcs. • Hard Disk Drive Fixing Screw (w/sleeve and damper 12 pcs. * The CD-ROM contains the operating instructions (PDFs) and the setup tools (Panasonic IP setup software, etc.). Optional Accessories RAID5 Board WJ-NDB301 Extension Unit WJ-HDE300 (4 HDD slots for optional HDD units) Power Source : 120 V AC, 60 Hz (NTSC) 220 ~ 240 V AC, 50 Hz (PAL) Power Consumption: approx. 85 W (including 4 HDDs when installed) Dimensions : 420 mm (W) x 88 mm (H) x 350 mm (D) (19-9/16" (W) x 3-7/16" (H) x 13-13/16" (D)) (excluding rubber feet and projections) Weight : 7.2 kg (16 lbs.) (When no HDD exist)