Panasonic WJ-PR201 Operating Instructions - Page 31
channel Receiver Side Unit connection example, Connection example when using the cable coupler
View all Panasonic WJ-PR201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4 Connecting the Unit 1-channel Receiver Side Unit connection example In this example, the camera is powered by PoE and the receiver side unit is powered by an AC adaptor. E A F C G D B Ethernet cable (Cat-5e or higher, straight) Ethernet cable (Cat-5e or higher, straight) Coaxial cable Camera Camera side unit Receiver side unit Switching hub *1 For information about network cameras recommended by Panasonic, visit our web site. http://security.panasonic.com/pss/security/support/info.html *2 Use a PoE camera that consumes no more than 6.5 W. *3 When connecting a PoE camera or PoE+ camera to an external power supply, make sure to use the included PoE incompatible cable. When the camera side unit can be installed near the camera, connect the PoE incompatible cable directly to the camera. When the camera side unit is installed far from the camera, use the included cable coupler (page 31). When a PoE incompatible cable is used, power is not supplied from camera side unit to the camera. Connection example when using the cable coupler Camera side unit PoE incompatible cable (Included parts of camera side unit) Network connector Network connector Camera Cable coupler (Included parts of camera side unit) Ethernet cable Operating Instructions 31