Panasonic WVCU550C WVCU550C User Guide - Page 10
System Information - wv cu550 system controller
View all Panasonic WVCU550C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
SYSTEM INFORMATION Please note that the following functions were added to improve the operation of the combination cameras. s Additions q Selection of Pan/Tilt Speed The Pan/Tilt speed can be changed by selecting a mode in the menu (A1) displayed on the LCD display of the controller. 1. Select the desired monitor and camera. Camera cc A1 Monitor mm SLW FST s Version Information q WJ-SX550 Series Matrix Switcher The onscreen display indicates the version in "Cold Start" or "Normal Start" during the power up procedure. Matrix Switcher Model WJ-SX550B "Normal Start" CPU Board SW. Unit No. Video Character Type VD/VS Position 01 NTSC 1 VS F1 F2 F3 F4 2. Select a mode by pressing the [F3] or [F4] button. "❑" indicates the currently selected mode. SLW: Moves the Pan/Tilt Head at lower speed. FST: Moves the Pan/Tilt Head at higher speed. 3. Move the Joystick to move the Pan/Tilt Head in the desired direction. Note: Changing the Pan/Tilt speed by pressing the [STOP/SLOW] button is enabled only when FST mode is selected. ROM Ver. CPU Control Alarm Output RS-485 No.1 No.1 No.1 6.00 6.00 1.00 2.00 6.00 The above function is available in a system that includes the following equipment: WV-CU550 Series System Controller Ver. 6.00 or later WJ-SX550 Series Matrix Switcher CPU Ver. 6.00 or later Control Ver. 6.00 or later WV-PB5548 Data Board Ver. 6.00 or later q WV-CU550 Series System Controller SLW and FST modes are displayed in the menu for Ver. 6.00 or later. 10