Panasonic WX-LT350 Infrared Wireless Portable Sound System - Page 2

Infrared Wireless Portable Sound System - manual

Page 2 highlights

Infrared Wireless Portable Sound System Key Features (WX-LP100) Components and Functions (WX-LP100) • Integrated dual channel infrared wireless receiver • Two stereo (mixed to mono) multimedia inputs • Remote control of wireless microphones and multimedia sources from presenter microphone • Wide horizontal signal dispersion for even coverage • Compact, lightweight and rugged design for flexible placement • Infrared technology provides an environment where frequency interference & eavesdropping are problems of the past • Front panel controls for easy access • Adjustable output for recording • Adjustable output for assistive listening devices Front Panel Rear Panel POWER MIC 1 Volume Control MIC 2 Volume Control LINE 1 Volume Control LINE 2 Volume Control Sensor Input Line Input 2 Line Input 1 Line Output Line Output Volume Control Specifications (WX-LP100) Amplifier/Receiver Unit Power Source 24 V DC (Using the attached AC adaptor unit) Power Consumption 450 mA Infrared Sensor Input 75 Ω F type connector (with Sensor WX-LS100) Output power for Sensor: 22 V DC, 100 mA Max. Receiving Channel Ch1: 2.3 MHz, Ch2: 2.8 MHz (Sub Carrier Frequencies) Receiving System TRF (Tuned Radio Frequency) Squelch Level 24 dBµV (including Sensor) Tone Squelch Frequency 32.768 kHz Line Input 1, 2 -12 dBV, unbalanced, ø3.5 mini jack (L and R mixing for stereo input) Line Output 0 dBV, unbalanced, ø3.5 mini jack (Monaural audio output for L and R) Volume Control* changeable microphone volume by the 2 dB step (+6 dB ~ -16 dB) (Reset by power OFF/ON) Speaker Type 12 cm Full Range Bass Reflex SPL 93 dB SPL, 1 m, 1 W Distortion Less than 1 % Frequency Response 100 Hz ~ 15 kHz (Line input ~ Speaker output) Operating Temperature +5 °C ~ +35 °C Dimensions 187 (W) x 309 mm (H) x 209 mm (D) (7-3/8"(W) x 12-3/16"(H) x 8-1/4"(D)) Weight approx. 3.7 kg (8.14 lbs.) Finish AV medium gray ABS resin (similar to Munsell N7) * Volume controllable Microphone: WX-LT350 Appearance (WX-LP100) Top 209(8-1/4") Front 187(7-3/8") Side 244(9-5/8") 65 (2-9/16") Rear Infrared Sensor (attached) Power Source Power Consumption Infrared Ray Wavelength Sensor Output Receiving Channel (Sub Carrier Frequencies) Dimensions Weight Finish 22 V DC (supplied from Amplifier/Receiver unit) 20 mA 850 nm 75 Ω F type connector Ch1: 2.3 MHz, Ch2: 2.8 MHz Max. ø113.5 mm x 34.5 mm (H) (ø4-7/16" x 1-3/8"(H)) (excluding a projection for F type connector) approx. 0.2 kg (0.44 lbs.) Black color / Infrared ray transmission acrylic resin Bottom Unit: mm (inches) Infrared Wireless Portable Sound System Optional Accessory Infrared Wireless Powered Speaker WX-LP100 All-in-one portable speaker incorporating 2-channel receiver, sensor, amplifier and speaker. Infrared Wireless Microphone (Pendant) WX-LT350 Hands-free pendant-style microphone. Equipped with remote volume controls. Ideal for teacher or presenter use. Battery Charger WX-LZ150 Direct connection. Allows simultaneous charging of 2 microphones. Infrared Wireless Microphone (Handheld) WX-LT150 Lightweight, simple design. Ideal for student, teacher or audience use. As an ENERGY STAR® Partner®, Panasonic has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Trademarks and registered trademarks - ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Important - Safety Precaution: carefully read the operating instructions and installation manual before using this product. DISTRIBUTED BY: • All TV pictures are simulated. • Weights and dimensions are approximate. • Specifications are subject to change without notice. • These products may be subject to export control regulations. www.panasonic.com/systemsintegration 3/2009 Printed in USA (1N-790C)

  • 1
  • 2

Key Features
(WX-LP100)
Integrated dual channel infrared wireless receiver
Two stereo (mixed to mono) multimedia inputs
Remote control of wireless microphones and multimedia
sources from presenter microphone
Wide horizontal signal dispersion for even coverage
Compact, lightweight and rugged design for flexible placement
Infrared technology provides an environment where frequency
interference & eavesdropping are problems of the past
Front panel controls for easy access
Adjustable output for recording
Adjustable output for assistive listening devices
Components and Functions
(WX-LP100)
DISTRIBUTED BY:
All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Trademarks and registered trademarks
–ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
www.panasonic.com/systemsintegration
3/2009 Printed in USA (1N-790C)
Appearance
(WX-LP100)
Rear Panel
Top
Front
Side
Rear
Bottom
Front Panel
Specifications
(WX-LP100)
Infrared Wireless Portable Sound System
Optional Accessory
Infrared Wireless Powered Speaker
WX-LP100
All-in-one portable speaker incorporating
2-channel receiver, sensor,
amplifier and speaker.
Hands-free pendant-style microphone.
Equipped with remote volume controls.
Ideal for teacher or presenter use.
Direct connection.
Allows simultaneous charging
of 2 microphones.
Infrared Wireless Microphone (Pendant)
WX-LT350
Lightweight, simple design.
Ideal for student, teacher or
audience use.
Infrared Wireless Microphone (Handheld)
WX-LT150
Battery Charger
WX-LZ150
Infrared Wireless Portable Sound System
Amplifier/Receiver Unit
Power Source
24 V DC (Using the attached AC adaptor unit)
Power Consumption
450 mA
Infrared Sensor Input
75
F type connector (with Sensor WX-LS100)
Output power for Sensor: 22 V DC, 100 mA Max.
Receiving Channel
Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Receiving System
TRF (Tuned Radio Frequency)
Squelch Level
24 dB
µ
V (including Sensor)
Tone Squelch Frequency
32.768 kHz
Line Input 1, 2
-
12 dBV, unbalanced, ø3.5 mini jack
(L and R mixing for stereo input)
Line Output
0 dBV, unbalanced, ø3.5 mini jack
(Monaural audio output for L and R)
Volume Control*
changeable microphone volume by the 2 dB step
(+6 dB ~
-
16 dB) (Reset by power OFF/ON)
Speaker Type
12 cm Full Range Bass Reflex
SPL
93 dB SPL, 1 m, 1 W
Distortion
Less than 1 %
Frequency Response
100 Hz ~ 15 kHz (Line input ~ Speaker output)
Operating Temperature
+5
°
C ~ +35
°
C
Dimensions
187 (W) x 309 mm (H) x 209 mm (D) (7-3/8"(W) x 12-3/16"(H) x 8-1/4"(D))
Weight
approx. 3.7 kg (8.14 lbs.)
Finish
AV medium gray ABS resin (similar to Munsell N7)
* Volume controllable Microphone: WX-LT350
Infrared Sensor (attached)
Power Source
22 V DC (supplied from Amplifier/Receiver unit)
Power Consumption
20 mA
Infrared Ray Wavelength
850 nm
Sensor Output
75
F type connector
Receiving Channel
Ch1: 2.3 MHz, Ch2: 2.8 MHz
(Sub Carrier Frequencies)
Dimensions
Max. ø113.5 mm x 34.5 mm (H) (ø4-7/16" x 1-3/8"(H))
(excluding a projection for F type connector)
Weight
approx. 0.2 kg (0.44 lbs.)
Finish
Black color / Infrared ray transmission acrylic resin
187(7-3/8")
209(8-1/4")
65
(2-9/16")
244(9-5/8")
Unit: mm (inches)
Sensor Input
Line Input 2
Line Input 1
Line Output
Line Output Volume Control
POWER
MIC 1 Volume Control
MIC 2 Volume Control
LINE 1 Volume Control
LINE 2 Volume Control
As an ENERGY STAR
®
Partner
®
, Panasonic has
determined that this product
meets the ENERGY STAR
®
guidelines for energy efficiency.