Panasonic fv05vf2 FV05VFA2 User Guide - Page 5
motor/grille
View all Panasonic fv05vf2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INSTALLATION I (JOIST MOUNTING-I) CONTINUED 3. Install the suspension bracket and the flange of fan body to joists by using long screws (ST4.2X20) according to Fig. 3. Others Joist Fan body 4 Long screws (ST4.2X20) Fig. 3-1 A = 10 1/4-12 inches Joist 4. Install the suspension bracket to joists by using long screws (ST4.2X20) and secure it to the fan body by using screw II (ST4.2X10) (Fig. 4) 5. Remove junction box cover and secure conduit or stress relief to junction box knock-out hole. (Fig. 5) 6. Refer to wiring diagram (page 3). Using wire nuts, connect house power wires to ventilating fan wires: black to black; white to white; green to green; Replace the junction box cover. (Fig. 5) CAUTION: Mount junction box cover carefully so that lead wires are not pinched. 7. Install a duct and secure it with duct tape or clamps. Fan body 2 Long screws (ST4.2X20) Fig. 3-2 Screw II (ST4.2X10) Joist 2 Long screws (ST4.2X20) Conduit Junction box cover 4 , Conduit Junction box Fig. 4 Duct Duct tape Joist Wire nut 8. Finish ceiling work. Ceiling hole should be aligned with the edge of the flange. (Fig. 6) Lead wires Green wires 9. Follow the Fig. 12-3, 12-4 (page 9) and Fig. 7 (page 8) of the original installation instruction to complete the motor/grille assembly installation. Ceiling .10 718 (275) inches (mm) 5 Fig. 5 0 0 t2I Fig. 6