Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions - Page 127
[auto Sw], Focus/y Get]
View all Panasonic microP2 Handheld AVC-ULTRA HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
[A.IRIS SPEED] Item [A.IRIS WINDOW] [AREA MODE] [WFM MODE] [ZEBRA] [ZEBRA MODE] [BARS TYPE] [FRONT REC] Chapter 6 Menu Operations - Menu list Description of settings Sets the control speed of the auto iris function. [FAST], [NORMAL], [SLOW] ffFactory setting: [NORMAL] Selects the auto iris detection window. [NORM1]: Window that is near screen center. [NORM2]: Window that is near screen bottom. [CENTER]: Window that is a spot in the screen center. ffFactory setting: [NORM1] Assigns the function to be performed within the area selected using the control stick during shooting. [INHIBIT]: Does not allocate a function. [FOCUS]: Auto focus/focus bar function [IRIS]: Auto iris function [Y GET]: Brightness display function [FOCUS/IRIS]: Activates [FOCUS] and [IRIS] simultaneously. [FOCUS/Y GET]: Activates [FOCUS] and [Y GET] simultaneously. ffFactory setting: [INHIBIT] Selects the type of waveform to be displayed on the LCD monitor when the button is pressed. [WAVE]: Displays as a waveform. [VECTOR]: Displays as a vector. [WAVE/VECT]: Each time the button is pressed, the display changes in order from (no display) → [WAVE] (waveform) → [VECTOR] (vector) → (no display). ffFactory setting: [WAVE] Displays/hides zebra patterns. [ON]: Displays zebra patterns. [OFF]: Does not display zebra patterns. ffFactory setting: [OFF] If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations. Selects whether to keep displaying zebra patterns. [CONTINUE]: Keep the display of zebra patterns. [MOMENT]: Displays zebra patterns for approximately five seconds. ffFactory setting: [MOMENT] Selects the color bar to use. [SMPTE]: Uses the color bar in the SMPTE standard. [FULL BARS]: Uses full color bars. [SPLIT]: Uses SPLIT color bars for SNG (Satellite News Gathering). [ARIB]: Uses ARIB standard color bars. ffFactory setting: [SMPTE] Sets operation of the REC button on the front of the camera. [INHIBIT]: Does not activate the operation. [ACTIVE]: Activates the operation. ffFactory setting: [ACTIVE] [AUTO SW] Configure the settings regarding the auto mode. Auto iris, auto gain control, auto tracking white balance, and auto focus functions can be set separately. These menu items cannot be set when the thumbnail screen is displayed. [A.IRIS] [AGC] Item [AGC LIMIT] [AGC POINT] [A.SHUTTER] [A.SHUTTER LIMIT] [A.SHUTTER POINT] Description of settings Enables/disables the auto iris control. [ON]: Performs the auto iris control operation when in auto mode. The button does not work. [OFF]: Does not perform the auto iris control operation when in auto mode. Activates the iris control selected with the button. ffFactory setting: [ON] Sets the auto gain control operations when [ON] is selected in [A.IRIS]. [ON]: Performs the operation of the [AGC] function that automatically adjusts camera gain when in auto mode. [OFF]: Does not perform the operation of the [AGC] function that automatically adjusts camera gain when in auto mode. ffFactory setting: [ON] Sets the maximum gain value during [AGC] operation. [3dB], [6dB], [12dB], [18dB] ffFactory setting: [6dB] Sets the F value to switch control to [AGC] from auto iris during [AGC] operation. [F4.0], [F5.6] ffFactory setting: [F4.0] Sets the auto shutter control operations when [ON] is selected in [A.IRIS]. [ON]: Performs the operation of auto shutter when in auto mode. [OFF]: Does not perform the operation of auto shutter when in auto mode. ffFactory setting: [ON] Sets the maximum shutter value during [A.SHUTTER] operation. [1/100], [1/120], [1/250] ffFactory setting: [1/250] Sets the F value to switch control from auto iris to [A.SHUTTER] during [A.SHUTTER] operation. [F8.0], [F9.6] ffFactory setting: [F8.0] - 127 -