Paradigm CI Elite E7-LCR Manual - Page 6

SPEAKER PLACEMENT GUIDELINES (all models) 3. Installing the Speaker IMPORTANT! While it is possible to use a manual screwdriver for installation, we strongly suggest using a power drill. To avoid damaging or breaking the clamps, set your drill to a LOW setting. A high power setting is NOT necessary and may cause clamps to crack or break from the added force. Such damage is NOT covered under warranty. 1) Set your Power Drill to the Low setting. 2) Ensure the clamps on the lip of the speaker are positioned exactly as shown in the Warning Diagrams on the top of page 6. If they are not correctly positioned, refer to these diagrams. 3) Gently push the assembly into the ceiling or wall hole (Fig. 1d). 4) Supporting the assembly with one hand, tighten each screw (Fig. 1e). Stop tightening when you sense resistance. If desired, engage the Screen Compensation Switch (see "Screen Compensation Switch" section on page 7). 1) Gently press the grille onto the front face of the speaker (Fig. 1f). The magnets will ensure correct attachment. 5